numancs EMERSON Industrial Automation

Double-action actuators. Diameter 32 to 100 mm Stroke up to 2000 mm 1 • pecific versions: nose-to-nose, back-toS back, tandem, 3-position. 2 • ompatible with static/dynamic rod stops, C and guide units. 3 • Equipped with distributors. r There is at least one T-groove on 3 faces, for all diameters. r Easy maintenance: no lubrication, all functions on the same face (air supply, damping adjustment, detection). r Vernier adjustment for precise pneumatic damping. r Minimal start-up time and machine setting up facilitated by installing magnetic detectors in the top of the groove, using just a screwdriver....

1 • Penetrating rod version 2 • Anti-rotation version Cost reduction and increased productivity enable you to design more compact automatic mechanismss, with enhanced reliability. The small size and base area of the G449 series compact actuators save up to 65% in volume, for an equivalent diameter and stroke, in relation to ISO actuators 15552/6431. r The concept of the piston seal, the piston with grease reserve and the self-lubricating bearing all contribute to a life cycle of more than 3000 km (> 15 million cycles for an actuator with a stroke of 100 mm) r These actuators can be equipped with...

Function Diameter Stroke Acceptable pressure Temperature range Max. velocity Damping Detection Mountings G453 ISO 15552 double action 32 to 100 mm 25 to 2000 mm max. 10 bar -20°C to +70°C 2 m/s adjustable pneumatic bulb (ILS) magnetic-resistive (MR) standardised range penetrating rod version rod stops U or H guide units with plain or ball bearings stainless rod and assembly screws high temperature version version for corrosive atmospheres 3-position, tandem installation, etc. "high performance" seal for slow/high velocities ATEX version for explosive atmospheres G449 ISO 21287 single and double...