Daniel Orifice Fittings Brochure
10Pages

Daniel Orifice Fittings Brochure Senior Orifice Fitting, Simplex Orifice Plate Holder, Junior Orifice Fitting, Orifice Flange Union, Meter Tubes

your bottom When the stakes are high, any amount of unaccounted hydrocarbon drains the bottom line. That's why companies like yours count on proven measurement technology and industry expertise from Daniel to improve service, reduce cost and add value. Daniel® Overview For more than 70 years Daniel has been at the forefront of measurement technology development for the Oil and Gas Industry. Daniel has become a leading figure in the development of the standards that govern orifice measurement around the world. With offices around the globe, Daniel is capable of offering the level of quality...

Orifice Fittings operate by means of differential pressure technology. They contain an orifice plate that restricts the flow of product through the pipeline. As fluid approaches the orifice plate pressure increases slightly and drops suddenly as the orifice is passed. Established procedures and calculations allow the flow rate to be inferred from the differential in pressure. The Daniel Senior Orifice Fitting is a dual-chamber device that reigns as the most widely used means of measurement for natural gas. Designed to allow operation by one person, this differential technology meter saves...

Daniel® Simplex® Orifice Plate Holders Daniel Simplex Orifice Plate Holders are single-chamber fittings that house and accurately position an orifice plate for differential pressure measurement. These fittings allow the removal or insertion of the orifice plate quickly and economically. The single chamber design allows for inspection and replacement of orifice plates without removing the Simplex meter from the flow line. Since Simplex fittings use one piece bodies, there is no spillage in liquid service, no rusted stud bolts, no nuts to remove, no flanges to spread apart and no line strain....

Safety, simplicity and ease of operation make Daniel Junior Orifice Fitting a popular choice for reliable measurement at large volume meter stations. The Junior Orifice Fitting is a single-chamber fitting, engineered and manufactured to make orifice plate changing quick and easy at installations where line movement from flange spreading is undesirable. Features and benefits > Rack-and-pinion configuration ensures fast plate changing ► Saves time by avoiding flange spreading > Junior Orifice Fittings installed on liquid lines prevent product spillage during plate changing > All parts can be...

Daniel® Orifice Flange Union Daniel offers a comprehensive line of Orifice Flange Unions manufactured to ensure the highest possible accuracy in measurement, backed by the reliability and experience only Daniel can provide. Daniel Orifice Flange Unions provide economic differential measurement with little or no maintenance. The Orifice Flange Union serves as an economical, simple device for securely holding an orifice plate in a line. Features and benefits: Advanced machining equipment enables Daniel to meet the mos > stringent tolerances and recommendations for flanges as specified in ANSI...

Daniel® Meter Tubes Daniel Meter Tubes are accurate and dependable instruments that adhere to the highest quality standards. They are an integral piece of a Daniel Orifice Meter. Quality Fabrication Close quality control guarantees highly accurate fabrication of Meter Tubes for Orifice Meters. Special jigs and fixtures are used to assure precise alignment of tube and fitting so there are no steps or offsets. All welds are ground and micrometer readings are made. Testing Radiography and hydrostatic testing is available for Daniel Orifice Meters to ensure measurement accuracy. Micrometer and...

Daniel® Engineered Systems Daniel Measurement and Control is the industry leader in designing, constructing and commissioning of complex oil and gas metering systems to exacting standards. This global organization offers decades of petroleum fiscal flow measurement application experience. Customers rely confidently on Daniel's Systems Group international fabrication facilities, customized engineering and its successes in field-testing and support. From the simplest single-stream skid to complex on-site installations, Daniel Systems delivers both natural gas and liquid petroleum turnkey...

Daniel® Measurement Services, Inc. takes pride in being there with the right solution for customers with gas and liquid fiscal flow measurement applications. Around the clock, and around the world, Daniel Measurement Services has experienced, highly qualified people prepared to assist customers with: Startup and commissioning Preventative maintenance Product repair/upgrades Project management and integration Meter tube inspection and recertification Educational services Remote diagnostics Warranty Plus! The Solution can be a warranty-enhancement program, or a remote dialup check of...

Emerson Process Management Daniel Measurement and Control, Inc., Division Headquarters Houston, Texas, USA T: 713-467-6000, F: 713-827-3880 USA Toll Free 1-888-FLOW-001 www.daniel.com Calgary, Alberta, Canada T: 403-279-1879, F: 403-236-1337 Alberta Toll Free 1-800-242-3197 Sales@Danielind-can.com Service@Danielind-can.com Stirling, Scotland - Europe, Middle East, Africa T: +44 (0) 1786 433400, F: +44 (0) 1786 433401 Singapore - Asia Pacific Emerson Process Management Asia Pacific Private Limited T: +65-6777-8211, F: +65-6770-8001 Daniel Measurement and Control, Inc. and Daniel Measurement...