AStALOCKOUT VALVE • Modular assembly to 652 and 653 series manifold using common body clamps • Provides high exhaust capacity of downstream pressure • Available as full-flow start or slow-start • Slow-start feature allows operator to turn knob counter clock wise to “On” position, gradually ramping up downstream pressure • Bright yellow body with red knob is easily identified as an emergency shut-off device • Typically located as the final component in an FRL manifold 3/2 Lockout Valve with Slow Start Feature Performance Data *Ports are not threaded (grey Flanges). Easily connect to 652 Series Manifold. When connecting to pipe, use end-plate kits #T652AT502468002 (652 Series) or T653AT (653 Series). Materials in contact with fluid HOW TO ORDER Lockout Valve T 652 A 5 L 0 Thread connection T = Modular Mounting Product series 652 653 Revision letter A Product type 5 = 3/2 - Quick Exhaust 6 = 3/2 - Slow Start - Quick Exhaust (1) If multiple options are required, please use the on-line CAD configurator on the website to generate the part number (www.asco.com). Options (') A00 = Without option 111 = Metal Muffler 115 = Scissor Lock 2B9 = 111 + 115 Port size 4 = 1/2 (652 Series) Valve Type L = Manually Operated Lockout 01811GB-2017/R02 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asco.com 38 - Air Preparation

Note: When the knob is pushed down (Closed position), the lockout shaft extends out of the bottom by 12,2 mm. The lockout hole diameter in the shaft is 11,2 mm. These measurements are the same for the standard Lockout and the Slow-Start version. 3/2 Lockout Valve with Slow Start Feature 01811GB-2017/R02 Availability, design and specifications are subject to change without notice. All rights reserved. 3/2 Lockout Valve with Slow Start Feature Cross Section 3/2 Lockout Valve Cross Section All leaflets are available on: www.asco.com