Catalogue-Accessories-Electrical accessories-909-1 relay

1 / 4 PagesView full catalog

Catalogue-Accessories-Electrical accessories-909-1 relay

Product catalog summary

Features:

Electronic controller for solenoid valves in dust collector systems.
Integral ∆P sensor for ON/OFF filter cleaning cycles.
Microprocessor management with standard supply voltage and output voltage selectable via jumper.
Equipped with 3 programming keys and a 3-digit LED display.
Adjustable pulse and interval times, automatic detection of the number of valves, and additional post-cleaning cycle mode.
High immunity from external interference and short-circuit protection for each output.
Includes 1 output relay for group alarms and 2 digital inputs.

Construction:

Housing made of ABS (acryl nitrile butadiene styrene), grey.
Cover made of transparent polycarbonate.

Electrical Characteristics:

Standard supply voltage: AC 230/115 V.
Output voltage: DC 24 V, with other voltages available on request.

Specifications:

Designed for sequencers in dust collector systems with ∆P control via an internal pressure sensor.
Capable of controlling up to 48 solenoid valves.
Maximum load power per output: 25 W.
Operating ambient temperature: -10 to 60°C.
Electrical enclosure protection: IP65.
Adjustable pulse time: 0.05 - 5.0 seconds.
Adjustable interval time: 1 - 999 seconds.

Installation:

Includes installation and maintenance instructions with each sequencer.
Options for other voltage ratings, housings, and ATEX-approved devices available on request.

Wiring Diagram:

Details the connections for supply voltage, fuse, common output number, and earth.
Includes notes on using RC filters with output voltage 230VAC to prevent malfunctions.

Catalog excerpts

Catalogue-Accessories-Electrical accessories-909-1 relay-1

SEQUENCERS FOR DUST COLLECTOR SYSTEMS AP control via internal pressure sensor for the control of up to 48 solenoid valves FEATURES • Electronic controller for the control of solenoid valves in dust collector systems • Integral AP sensor for ON/OFF filter cleaning cycles • Microprocessor management • Standard supply voltage and output voltage selectable via jumper • 3 programming keys • 3 digit LED display • Adjustable pulse and interval times • Automatic detection of number of valves • Additional post-cleaning cycle mode • High immunity from external interference • Short-circuit protection of every single output • 1 output relay (e.g. group alarm), 2 digital inputs (volt-free) CONSTRUCTION Housing ABS (acryl nitrile butadiene styrene), grey Cover PC (polycarbonate), transparent ELECTRICAL CHARACTERISTICS Standard supply voltage AC (~) 230/115 V Output voltage DC (=) 24 V Other voltages on request. 60303GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.eu

Open the catalog to page 1

Catalogue-Accessories-Electrical accessories-909-1 relay-2

SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 OPTIONS (on request) Other voltage ratings, other housings and devices with ATEX approval Installation/maintenance instructions are included with each sequencer DIMENSIONS (mm), WEIGHTS Size 1 60303GB-2010/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.eu 6

Open the catalog to page 2

Catalogue-Accessories-Electrical accessories-909-1 relay-3

SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 ADDITIONAL CYCLES FROM FAN CONTACT WITH SET UP F13=0 (contact closed = fan ON) NOTE: link clamps if not used with inputs from external contact enabled (F01=0) ON/OFF CLEANING CYCLE FROM EXTERNAL CONTACT (contact closed = cycle enabled) NOTE: link clamps if not used with inputs from external contact enabled (F01=0) CUMULATIVE ALARM RELAY EARTH COMMON OUTPUT NUMBER -P2 dP filter clean side +P1 dP filter dirty side SUPPLY VOLTAGE 1 Phase 2 Neutral 3 Earth See technical features POWER SWITCH (option) WIRING DIAGRAM OUTPUT VOLTAGE FOR ELECTRO-VALVES...

Open the catalog to page 3

Catalogue-Accessories-Electrical accessories-909-1 relay-4

60303GB-2010/R01 Availability, design and specifications are subject to change without notice. All rights reserved. SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 All leaflets are available on: www.asconumatics.eu

Open the catalog to page 4