1. Catalogs
  2. ASCO
  3. Catalogue-Accessories-Dust Collector-909

Catalogue-Accessories-Dust Collector-909
1 /4Pages

Catalogue-Accessories-Dust Collector-909

Catalogue-Accessories-Dust Collector-909
1 /4Pages

Catalog excerpts

Catalogue-Accessories-Dust Collector-909-1

SEQUENCERS FOR DUST COLLECTOR SYSTEMS without internal AP pressure sensor for the control of up to 48 solenoid valves FEATURES • Electronic controller for the control of solenoid valves in dust collector systems • ON/OFF filter cleaning cycle from external switch • Microprocessor management • Supply and output voltage selectable via jumper • 3 programming keys • 3 digit LED display • Adjustable pulse and interval times • Automatic detection of number of valves • Additional post-cleaning cycle mode • High immunity from external interference • Short-circuit protection of every single output • 1 output relay (e.g. group alarm), 2 digital inputs (volt-free) Housing ABS (acryl nitrile butadiene styrene), grey Cover PC (polycarbonate), transparent ELECTRICAL CHARACTERISTICS Standard supply voltage AC (~) 230/115 V Output voltage DC (=) 24 V Other voltages on request. 60300GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.eu

 Open the catalog to page 1
Catalogue-Accessories-Dust Collector-909-2

SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 OPTIONS (on request) Other voltage ratings, other housings and devices with ATEX approval Installation/maintenance instructions are included with each sequencer DIMENSIONS (mm), WEIGHTS Sizes 1 and 2 60300GB-2010/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.eu 6

 Open the catalog to page 2
Catalogue-Accessories-Dust Collector-909-3

SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 ADDITIONAL CYCLES BY CONTACT FROM FAN (contact closed = fan ON) NOTE: link clamps if not used with inputs from external contact enabled (F01=0) ON/OFF CLEANING CYCLE BY EXTERNAL CONTACT/PRESSURE SWITCH D6 WITH F07=1, C6 WITH F07=0 (contact closed = cycle enabled) NOTE: link clamps if not used with inputs from external contact enabled (F01=0) CUMULATIVE ALARM RELAY EARTH COMMON OUTPUT NUMBER SUPPLY VOLTAGE 1 Phase 2 Neutral 3 Earth See technical features POWER SWITCH (option) WIRING DIAGRAM OUTPUT VOLTAGE FOR ELECTRO-VALVES See technical features...

 Open the catalog to page 3
Catalogue-Accessories-Dust Collector-909-4

60300GB-2010/R01 Availability, design and specifications are subject to change without notice. All rights reserved. SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 All leaflets are available on: www.asconumatics.eu

 Open the catalog to page 4

All ASCO catalogs and technical brochures

  1. FRL Accessories

    14  Pages

  2. 908 series

    2  Pages

  3. Accessories

    2  Pages

  4. Oil and gaz

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.