ADJUSTABLE PRESSURE SWITCH with or without protection and status indicators G 1/4 or subbase mounted body GENERAL PROTECTION AND STATUS INDICATORS WITHOUT WITH FLUID : air ou gaz neutre, filtré, lubrifié ou non PRESSURE SETTING : 0,5 to 10 bar (0,2 - 6 bar on request) HYSTERESIS : 0,4 bar at the beginning of adjustment range 1 bar at the end of adjustment range MAX. PRESSURE (PMA) : 10 bar or 16 bar OPERATING TEMPERATURE : 10°C; +60°C : 0°C, +60°C MAX. VOLTAGE : 250 V - CA/CC : 24 Volts-courant continu CURRENT BREAKING CAPACITY : 5A - 250V resistive : 2A - 24Vcc resistive PROTECTION DEGREE : IP65 MOUNTING POSITIONS : all positions MAX. SPEED : 60 cycles per minute Grivory (PA61/XT) body / aluminium body for 16 bar version Nitrile (NBR) sealings Commutator (reversing switch) • at rest : contact 1 - 2 made • at work : contact 1 - 3 made Mechanical service life : 5.106 contacts Pressure set by set screw and lock-nut catalogue number Without With protection protection 34900015 34900018 34900019 34900021 - Adjustable pressure switch with side pneumatic connection, tapped G1/4 Adjustable pressure switch with subbase mounted pneumatic connection (version adaptable on FRL, see P710) DIMENSIONS AND WEIGHT Weight : 110 g Version without protection and status indicators Tapped subbase mounted ELECTRICAL DIAGRAM Pressure set screw (spanner for hexagon nuts : 3 mm) 00576GB-2013/R01 Availability, design and specifications are subject to change without notice. All rights reserved. Version with protection and status indicators subbase mounted Tapped Pressure switch 3 ISO4400 size 30 connector, 4 terminals, rotatable by 90° i Terminal connector Status indicated by two diodes : • at rest : contact 1-2 made : orange diode lights • at work : contact 1-3 made : red diode lights Terminal connection for 1,5 mm2 wire Integrated interference blanking Pressure switch terminal 1 Pressure set screw (spanner for hexagon nuts : 3 mm) 2 2 holes Ø 5,5 for mounting 4 ISO 4400 size 30 connector, 4 terminals (not rotatable) 3 Identification label holder All leaflets are available on: www.ascon

DIAPHRAGM PRESSURE SWITCHES G1/8 - G1/4 external threaded body GENERAL F luid or dry Air or neutral gas, filtered, lubricated Maximum allowable pressure (MPA) 16 bar Control range 0 - 10 bar Fluid temperature -10°C to +60°C Max. speed 60 cycles per minute Hysteresis 0,2 bar at the beginning of control range Mechanical service life 106 contacts Mounting positions All positions CONSTRUCTION Body Steel Seals FPM (fluoroelastomer) Pressure set By set screw ELECTRICAL CHARACTERISTICS Max. switched voltage Max. switched current Electric contact SPECIFICATIONS control range (bar) designation Diaphragm...

PRESSURE SWITCH FLUID : Air, water, alkali, brake liquid, ammonia, ethylene glycol, silicone, ketone MAX. FLUID TEMPERATURE : 120 °C ANTICIPATED MIN. CYCLES : 1 million PROTECTION CLASS : IP 65 HYSTERESIS : 15 to 30 % of setting value WEIGHT CASE THREADED FITTING DIAPHRAGM CONNECTOR : 180 gr max. : Anodized aluminium : Passivated AVP steel : EPDM : 30 mm DIN EN 175301-803 (old DIN 43650) Form A ELECTRICAL CHARACTERISTICS MAX. SWITCHED VOLTAGE MAX. SWITCHED CURRENT Order Code * *delivered with connector Adjustment screw 00576GB-2011/R01 Availability, design and specifications are subject to change...

ELECTRONIC PRESSURE SWITCH Hysteresis and comparator functions - Digital display G1/8 FLUID : air or neutral gas, filtered, not lubricated, free of condensate CONNECTION : G1/8 PRESSURE RANGE : 0 to 10 bar MAX. OVERPRESSURE : 15 bar OPERATING TEMPERATURE : 0°C, +50°C (storage: -20°C, +60°C) ELECTRICAL CONNECTION : 4-pin M8 connector SUPPLY VOLTAGE : 12 to 24 volts, max. ripple 10%, reverse voltage protection CONSUMPTION : < 55mA VOLTAGE SPIKE : 350 V Peak, 1µs ACCURACY : +/- 200 mbar (2% of full range) DIGITAL DISPLAY : 3-digit - 7 segments - display frequency : 5 Hz UNITS OF MEASURE : bar -...