MAGNETIC POSITION DETECTORS FOR " T " GROOVES - MOUNTING KITS FOR "T" GROOVE CYLINDERS page NOTE: Series 441 cylinders Ø 32-100 mm : 6 "T" grooves (1) Fastening mini-kit (special nut + screw) supplied with detectors Series 449 cylinders Ø 20-25 mm : 4 "T" grooves 32-100 mm : 5 "T" grooves Ø Series 453 cylinders Ø 32-100 mm : 5 "T" grooves Series 454 cylinders Special adaptor for magnetic detector (See page P229-7) In order to control the max. end of cylinder stroke, the detectors must be mounted in the following direction: Series 441-449-453-454 cylinders: Ø32-40: cable oriented towards the middle of the cylinder Ø50-100: any position FOR TIE RODS CYLINDERS series code fastening kit lead outlet version P494A3129200A00 P494A5129200A00 P494A8129200A00 P494AP129200A00 00570GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved. It is possible to fasten the detector with its electric outlet to the centre of the cylinder (in order to be able to control the max. end of travel of the cylinder) In order to fasten the detector with its electric outlet to the rear, rotate the unit detector + collar by 180° The detectors can be mounted on any one of the 4 tie rods. K All leaflets are available on: www.asconumatics.eu

MAGNETIC POSITION DETECTORS FOR " T " GROOVES - MOUNTING KITS FOR ROUND CYLINDERS series stainless steel (AISI 303 + 304) It is possible to mount magnetic detectors for intermediate position indication : mounting by collar Ø 8-20 : any position. Ø 25-80 : cable oriented towards the cylinder ends Ø cylinder 8 10 12 16 20 25 32 40 50 63 D 14,5 15,5 15 16,5 19 21,5 26,5 31 38 45 E 13,5 14,5 16,5 19 20,5 23 29,5 31,5 36,5 43,5 On all diameters, it is possible to mount the detector with its electrical outlet facing towards the cylinder barrel (in order to be able to control the max. end of travel...