SEQUENCERS FOR DUST COLLECTOR SYSTEMS without internal ∆P pressure sensor for the control of up to 48 solenoid valves Electronic controller for the control of solenoid valves in dust collector systems ON/OFF filter cleaning cycle from external switch Microprocessor management Supply and output voltage selectable via jumper 5 programming keys Alphanumeric display, multilingual Adjustable pulse and interval times Automatic detection of number of valves Additional post-cleaning cycle mode High immunity from external interference Short-circuit protection of every single output 3 output relay (e.g. group alarm), 3 digital inputs (volt-free) CONSTRUCTION Housing Cover ABS (acryl nitrile butadiene styrene), grey PC (polycarbonate), transparent ELECTRICAL CHARACTERISTICS Standard supply voltage AC (~) 230/115 V Output voltage DC (=) 24 V Other voltages on request max. load power per output ambient temperature electrical enclosure protection IP65 60306GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved. adjustable pulse time adjustable interval time

Other voltage ratings, other housings and devices with ATEX approval Installation/maintenance instructions are included with each sequencer DIMENSIONS (mm), WEIGHTS Size 1 60306GB-2010/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.eu 7

60306GB-2010/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.eu

SEQUENCERS FOR DUST COLLECTOR SYSTEMS SERIES E909 60306GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved. WIRING DIAGRAM All leaflets are available on: www.asconumatics.eu 72