2/2 SOLENOID VALVESDIRECT AND PILOT OPERATED
72Pages

Pipe Series page 00027GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. STAINLESS STEEL BODY SYNTHETIC BODY (Potentially explosive atmospheres, see pages: V - VI) pad mount (M5/instant fittings) "pad 'mount (M5)~~ All leaflets are available on: www.asco.com

Quick Selection Chart - 2/2 SOLENOID VALVES LO 2 00027GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. (1) See «Combustible gas EN 161, Oil and Fuel» Section. All leaflets are available on: www.asco.com

Quick Selection Chart - 2/2 SOLENOID VALVES 00027GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asco.com

Quick Selection Chart - 2/2 SOLENOID VALVES LO 2 00027GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. 111 See: «Combustible gas EN 161, Oil and Fuel» 121 Contact us. All leaflets are available on: www.asco.com

Quick Selection Chart - POTENTIALLY EXPLOSIVE ATMOSPHERES 00027GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asco.com

ASTO Quick Selection Chart - POTENTIALLY EXPLOSIVE ATMOSPHERES 00027GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asco.com VI - Solenoid Valves (2/2)

SOLENOID VALVES direct operated, quick switching threaded or pad-mount body M5 NC NO 2/2 Series 065 00157GB-2017/R01 Availability, design and specifications are subject to change without notice. All rights reserved. FEATURES • Miniature solenoid valve for medical analyzers, gas analyzers and leak detectors • New flat-spring technology ensures no contamination of fluids (no friction) • Suitable for the control of gases • The valves have a service life of more than 1 billion cycles when used with inert gas • Short response times • Easy to integrate thanks to the valves' small size • Available...

SOLENOID VALVES SERIES 065 OPTIONS (on request) • Other seal materials • Response time 2-3 ms • Oxygen service • Other pipe connections are available • 0,7 W rated coil_ INSTALLATION_ • The solenoid valves can be mounted in any position without affecting operation • Threaded solenoid valves have 2 mounting holes in body • Pad-mount valves and o-ring seals for multiple manifolds_ prefix pipe thread basic number voltage suffix DIMENSIONS (mm), WEIGHT (kg) TYPE 01 Prefix "L” Solenoid Cable ends IP40 LE065A001V/002V/003V/004V (T) 2 electrical supply wires, length: 0,35 m. @ 2 mounting holes 0...

SOLENOID VALVES direct operated 1/8 - 1/4 NC 2/2 Series 256 FEATURES • Wide range of flow and pressure ratings • Quick disassembly of core tube for easy maintenance of internal parts • Standard disc seal made of FPM suitable for a wide range of operating temperatures and compatible with many fluids • Standard manual operator allows an easy installation (Except 4 and 5 mm orifice sizes) • AC/DC interchangeability of the solenoid without disassembly of the valve • Compliance with UL and CSA standards (coil 4/6,9 W) • Compact and low weight valve • The solenoid valves satisfy all relevant EU...

ASTO SOLENOID VALVES SERIES 256 • Valves can also be supplied with EPDM (ethylene-propylene) seals and discs. Use the appropriate optional suffix letter for identification (1/8 version only) • Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 2014/34/EU (www.asco.com) • Flying leads coil, use prefix L (e.g.: LG256B001VMS) (4 W/6,9 W coil only) • Oxygen service with seals and disc in FPM, suffix NV, example: SCG256B001NVMS • Solenoid valves integrated on manifold, orifice sizes 1,2 - 1,6 - 2 - 2,4 mm (www.asco.com) • Without manual operator, on request •...

ASCO™ Solenoid Valves For High Pressure Fluids Direct Operated, 1/8” or 1/4” tapped, 15 mm Compression Fittings 2/2 NC-NO Series 262 • High operating pressure • RoHS compliance • AC/DC interchangeability of the coil possible only for NC (10,1 W/11,6 W and 17,1 W/22,6 W) • Valves do not require a minimum operating pressure • Large selection of seal materials providing wide chemical compatibility • Compliance with UL and CSA standards • The solenoid valves satisfy all relevant EU directives General Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa] (*) Ensure that the compatibility...

(1) For dimensions, see drawing(s) for each construction type on the following page(s). (2) UR disc only, fluid temperature 0°C to+60°C, no other elastomer (^) Ensure that the compatibility of the fluids in contact with the materials is verified. can be used- 00167GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. 6 EMERSON. (C) Visit our website at www.emerson.com/asco

00167GB-2019/R02 Availability, design and specifications are subject to change without notice. All rights reserved. (1) For dimensions, see drawing(s) for each construction type on the following page(s). (^) Ensure that the compatibility of the fluids in contact with the materials is verified. (2) UR disc only, fluid temperature 0°C to+60°C, no other elastomer can be used. Asco Visit our website at www.emerson.com/asco

Voltage - class FL = 24 V / 50 Hz - class F FR = 48 V / 50 Hz - class F FT = 115 V / 50 Hz - class F F8 = 230 V / 50 Hz - class F H1 = 24 V DC - class H H9 = 48 V DC - class H Options Without manual operator N00 = NBR disc and seals V00 = FPM disc and seals VN0 = FPM disc and seals for Oxygen service EM0 = EPDM disc and seals, WrAs approved (2) E00 = EPDM disc and seals J00 = CR disc and seals T00 = PTFE disc and seals (1) With maintained manual operator N01 = NBR disc and seals V01 = FPM disc and seals VN1 = FPM disc and seals for Oxygen service E01 = EPDM disc and seals J01 = CR disc and...