Catalogs >
ASCO CARBON DIOXIDE >
CO2 Transfer Pump

CO2 Transfer Pump
3Pages

Catalog excerpts

CO2 Transfer Pumps ASCO CO2 Transfer Pumps: Low to Low Pressure ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These economical pumps need no lubrication and no day-to-day maintenance. A unique design allows parts to adjust automatically for wear. Highest efficiency is maintained for a very long time. Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed low-cost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out though the same piping. MC-3-SS with motor on baseframe Specifications Pump capacities (approx.) Pump model Electrical Differential Pressure consumption bar lb/in2 in kW * under ideal conditions Pumps on baseframes with motors Pump model Motor Size Weight packed 400 VAC ± 5 %/ 50 Hz / 3 Ph + PE (other voltages and frequencies on request) 460 VAC ± 5 %/ 60 Hz / 3 Ph + PE (other voltages and frequencies on request) ASCO CARBON DIOXIDE LTD | Hofenstrasse 19 | CH–9300 Wittenbach | T +41 71 466 80 80 | ascoco2.com Version 5.0 (05/24

Open the catalog to page 1

ASCO CO2 Transfer Pumps: Low to Low Pressure Pos. 001 ASCO CO2 Transfer Pump MC-3-SS with motor on stainless steel baseframe Complete heavy-duty type low to low pressure CO2 transfer pump with a transfer capacity up to 17‘000 kg/h (37'500 lb/h) at 1‘460 rpm (50 Hz) or 20‘000 kg/h (44'100 lb/h) at 1‘750 rpm (60 Hz) and differential pressure of 0 barg with a 5.5 kW (7.4 HP) at 50 Hz or 6.3 kW (8.5 HP) at 60 Hz motor. The pump is designed for 2 ½ inch (63.5 mm) NPT inlet and outlet ports insides of pump. Rotation is reversible. Pos. 002 ASCO CO2 Transfer Pump MC-3-SS without motor Complete...

Open the catalog to page 2

ASCO CO2 Transfer Pumps Low to Low Pressure: Options Pos. 001 Stainless steel hose DN25 with total length of 5.90m. (19 ft) With protection wire over total length. Both ends flat sealed with union nut g1 1/2“ in brass. Filling hose SS, DN40, flange DN40/PN40, 5.90 m (19 ft) Stainless steel hose DN40 with total length of 5.90 m. (19 ft) With protection wire over total length. Both ends flange DN40/PN40 according DIN 2635 ASCO CARBON DIOXIDE LTD | Hofenstrasse 19 | CH–9300 Wittenbach | T +41 71 466 80 80 | ascoco2.com Version 5.0 (05/24)

Open the catalog to page 3

CO2 Transfer Pump 3Pages

Catalog excerpts

All ASCO CARBON DIOXIDE catalogs and technical brochures

CO2 Transfer Pump
3Pages