Atmospheric CO2 Vaporiser
6Pages

CO2 Vaporising Atmospheric ASCO CO2 Vaporiser The atmospheric ASCO CO2 Vaporiser has been developed to drastically reduce CO 2 vaporisation costs. Available ambient air is used to achieve energy savings of over 95 % compared to standard electric vaporisers. The fans are automatically controlled temperaturedependent and only work if a consumer equipment is in operation. As each vaporiser is supplied prepiped and prewired, installation can be made within minutes. Bases for floor mounting are included. In addition to our standard models, we offer individual solutions of modern and easy to maintain CO2 vaporisers. In accordance with your requirements, we provide you with a suitable CO2 vaporiser. Advantages of an atmospheric ASCO CO2 vaporiser: • NEW: External control cabinet with 10 m connection cable for flexible installation and operation 2 coil system to ensure safe defrosting with built in solenoid valves 25 times less energy compared with electrically heated vaporisers With temperature-controlled start/stop device for intelligent power control Designed for continuous and automatic operation (no attendance required) Simple and fast installation, only electric power and CO2 required Built-in temperature sensors PT1000 to prevent liquid CO2 from flowing through Vaporisers with tubes in stainless steel or copper available Specifications Vaporising capalength/width/height mm incl. control boxbox city (approx.) from without control liquid CO22 at 17 bar (247 psi) in/out net weight connections kg approx. outer Ø power consumption 3041.4301 / AISI 304 SS = with stainless steel tubes EN Dimensions external control cabinet (L x W x H): 600 x 250 x 600 mm (24 x 9.8 x 24 in) Ambient air temperature: Ambient air temperature: ASCO CARBON DIOXIDE LTD | Hofenstrasse 19 | C

Atmospheric ASCO CO2 Vaporisers: Description CO2 gas to bottling line or other point of use Pressure reducing valve Temperature sensor with automatic shut-off Liquid carbon dioxide is taken from a tank, completely evaporated in the vaporiser and fed to the point of use. In order to ensure safe defrosting of the vaporiser, it is equipped with two autonomous coils, which are controlled by a solenoid valve each. While one vaporiser coil is in service, the other is being defrosted. The fans only operate if a consumer equipment is obtaining CO2 gas and the difference between inlet and outlet in...

Atmospheric ASCO CO2 Vaporisers: Description and installation Description ASCO Atmospheric CO2 Vaporisers are supplied as one unit, prewired, pretested (incl. pressure test to 35.4 bar) (513.4 psi) and ready for immediate use. They consist of a special heat exchanger unit with stainless steel tubes and aluminium fins. Air is forced through the heat exchanger by fans. Any condensate dropping from the tubes is collected by an aluminium tray mounted on the bottom of the unit, and an outlet pipe can be connected to drain. The unit also includes solenoid valves and a complete control box. A...

Atmospheric ASCO CO2 Vaporiser: Available standard capacities Pos. 001 200 kg/n (440 lb/h) atmospheric ASCO CO2 SS Vaporiser 200 kg/h (440 lb/h atmospheric ASCO CO2 SS Vaporiser with defrost With temperature dependent start/stop device Cooling circuit made of stainless steel tubes EN 1.4301 / AISI 304 400 VAC ± 5 %/ 50 Hz / 3 Ph + PE +N (other voltages and frequencies on request) air flow total: coil volume: net weight: fan speed: no. of fans: power cons. per fan: flange connection: Minimum ambient air temperature required +10 °C, max. +45 °C Pos. 002 300 kg/n (660 lb/h) atmospheric ASCO...

Atmospheric ASCO CO2 Vaporiser: Available standard capacities Pos. 004 1000 kg/n (2200 lb/h) atmospheric ASCO CO2 SS Vaporiser 1000 kg/h (2200 lb/h atmospheric ASCO CO2 SS Vaporiser with defrost With temperature dependent start/stop device Cooling circuit made of stainless steel tubes EN 1.4301 / AISI 304 400 VAC ± 5 %/ 50 Hz / 3 Ph + PE +N (other voltages and frequencies on request) air flow total: coil volume: net weight: fan speed: no. of fans: power cons. per fan: flange connection: Minimum ambient air temperature required +10 °C, max. +45 °C Atmospheric CO2 Vaporisers: Options Pos. 001...

Atmospheric CO2 Vaporisers: Options Pos. 004 CO2 flowmeter MF15 Mass flow sensor Type MF15 (fully calibrated) assembled to process pipe DN 15, PN 40 with flange connection DIN 2635. Measuring range 0 - 1‘000 kg/h (0- 2200 lb/h) at 22 bar (319 psi) The flow computer (on wall bracket) is equipped with digital display of current CO2 flow rate in kg/h as well as totalizer and integrated keyboard. 10 meter connection cable with plug is prewired and connected. Voltage 115 -230 V, 50/60 Hz Accessories included: • 2 pcs counterflange DN 15/PN40 welding (item no. 910101) • 8 pcs screw M12 x 45,...