ASCO Atmospheric CO2 Vaporizer The atmospheric ASCO CO2 vaporizer was developed to drastically reduce the costs of CO2 vaporization. It uses the existing ambient air for this purpose. The fans are temperature-controlled and only operate when a consumer is in use. This enables energy savings of over 95% compared to electric vaporizers. Installation can be completed in a matter of minutes, as each vaporizer is delivered fully piped and wired. A frame for floor mounting is included. • Energy efficient • Easy installation • High process reliability • Robust construction • Various capacities

• External control cabinet with 10 m connection cable for flexible installation and operation (including control cabinet heating) • 25 times less energy compared with electrically heated vaporizers • Built-in temperature sensors PT1000 to prevent liquid CO2 from flowing through • 2 coil system to ensure safe defrosting with built in solenoid valves • With temperature-controlled start/stop device for intelligent power control • Simple and fast installation, • Integrated condensate collection system with connection point Vaporizing capacity (apx.) from liquid CO2 at 17 bar (247 psi) length/width/height...

Atmospheric ASCO CO2 Vaporizers: Description CO2 gas to bottling line or other point of use Pressure reducing valve Temperature sensor with automatic shut-off Liquid carbon dioxide is taken from a tank, completely evaporated in the vaporiser and fed to the point of use. In order to ensure safe defrosting of the vaporizer, it is equipped with two autonomous coils, which are controlled by a solenoid valve each. While one vaporizer coil is in service, the other is being defrosted. The fans only operate if a consumer equipment is obtaining CO2 gas and the difference between inlet and outlet in the...

Atmospheric ASCO CO2 Vaporizers: Description and installation Description ASCO Atmospheric CO₂ Vaporizers are supplied as one unit, prewired, pretested (incl. pressure test to 35.4 bar) (513.4 psi) and ready for immediate use. They consist of a special heat exchanger unit with stainless steel tubes and aluminium fins. Air is forced through the heat exchanger by fans. Any condensate dropping from the tubes is collected by a tray mounted on the bottom of the unit, and an outlet pipe can be connected to drain. The unit also includes solenoid valves and a complete control box. A temperature sensor...

Atmospheric ASCO CO2 Vaporizer: Available standard capacities 200 kg/n (440 lb/h) atmospheric ASCO CO₂ SS Vaporizer 200 kg/h (440 lb/h atmospheric ASCO CO₂ SS Vaporizer with defrost With temperature dependent start/stop device With a register circuit made of stainless steel tubes EN 1.4301 / AISI 304 400 VAC ± 5 %/ 50 Hz / 3 Ph + PE +N air flow total: CO2 registry volume: net weight: fan speed: no. of fans: power cons. per fan: flange connection: Minimum ambient air temperature required +10 °C, max. +45 °C 300 kg/n (660 lb/h) atmospheric ASCO CO₂ SS Vaporizer 300 kg/h 660 lb/h atmospheric ASCO...

500 kg/n (1100 lb/h) atmospheric ASCO CO₂ SS Vaporizer 500 kg/h (1100 lb/h atmospheric ASCO CO₂ SS Vaporizer with defrost With temperature dependent start/stop device With a register circuit made of stainless steel tubes EN 1.4301 / AISI 304 400 VAC ± 5 %/ 50 Hz / 3 Ph + PE +N air flow total: coil volume: net weight: fan speed: no. of fans: power cons. per fan: flange connection: Minimum ambient air temperature required +10 °C, max. +45 °C 1000 kg/n (2200 lb/h) atmospheric ASCO CO₂ SS Vaporizer 1000 kg/h (2200 lb/h atmospheric ASCO CO₂ SS Vaporizer with defrost With temperature dependent start/stop...

Atmospheric CO₂ Vaporizers: Options Dome loaded pressure reducing valve C31 for gaseous and liquid CO₂ incl. repair kit (diaphragm and O-ring) Dome loaded pressure reducing valve C2-K32 for gaseous and liquid CO₂ incl. repair kit (diaphagm and O-ring) Line safety assembly 1“- 25 bar (363 psi) welding connection Pos. 003 Consisting of: • stainless steel pipe 1" / DN25 • safety valve 25 bar (363 psi) • vent ball valve stainless steel 1/4“

• Mass flow sensor Type DN15 (fully calibrated) assembled to process pipe DN 15, PN 40 with flange connection DIN 2635. • The transducer (on wall bracket) is equipped with digital display of current CO2 flow rate in kg/h as well as totalizer and integrated keyboard. • 5 meter connection cable with plug for terminal connections (unwired and unconnected) Accessories included: • Mass flow sensor Type DN25 (fully calibrated) assembled to process pipe DN 25, PN 40 with flange connection DIN 2635. • The transducer (on wall bracket) is equipped with digital display of current CO2 flow rat in kg/h as...