I800ATEX
2Pages

I800ATEX Microcontroller / weight indicator IP68 STAINLESS STEEL ,case suitable for advanced applications of vehicle input/output check (possibility of weighing a single vehicle or with trailer), data and print management. Weight indicator for areas classified as hazardous with protection methods according to: - II 3G Ex nR IIC T6 X / - II 3D Ex tD A22 IP68 T130° X. C Ideal for creating weighing systems, batching, and automation systems. CE-M approvable (OIML R-76 / EN 45501). Waterproof 17-key functional keypad. LCD display with 6 25-mm high contrast digits and with indication of active functions. Stained IP65 stainless steel case. Suitable for use on the table, or wall. Dimensions: 264x174x115mm. Up to 10.000e or multi-range 3 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use. Up to 800,000 displayable divisions for internal factory use. Up to 8 signal linearization points with DINITOOLS (3 from keypad). Internal resolution up to 3.000.000 points. A/D 24-bit sigma-delta conversion, up to 200 conv./sec. auto-select. Board protection case inside the box. Digital calibration and set-up from keyboard. Instrument management & configuration from PC with DINITOOLS. 4 channels (for single weighing system). 110-240 Vac power supply through fitted internal power adapter or fitted 6V 4,5Ah battery, rechargeable in safe zone. Connection with up to 8 load cells with 350 Ohm input resistance. High Resolution Weighing x 10. Net/Gross or lb/kg conversion. Accumulation. Formula weighing. Counting (Max. resolution of 1.500.000 divisions). In/Out Truck weighing. Hold. Peer-to-peer (up to 4 remote connectable indicators). Set Point Control (with optional interface). www.ascellsensor.com info@ascellsensor.com Page 1 of 2 Tel: (+34) 93 776 60 89 Fax: (+34) 93 775 14 72 These specifications are subjected to changes, due to continuous improvement of the design.

Fiber optic bidirectional port for connection with printer, labeller, PC, or PLC in safe area. 4 logic inputs and 4 barriered digital outputs, connectable to other intrinsic safety devices in a hazardous area. Power supplier, for hazardous areas, 230 Vac input, 10,5 Vdc intrinsically safe output, complete of Exd case, with protection modes: ATEX II (2)/2 G [Ex ib]/Ex d IIC T4 and ATEX II (2)/2 D [Ex ib]/Ex tD A21 T140° Complete with manual and DECLARATION of CONFORMITY. The manuals and C. ATEX CE CONFORMITY DECLARATIONS are available in EN and IT. Rechargeable ATEX battery from 9,6 Vdc and...