Catalogs >
ASC >
ASC OS 315LN

ASC OS 315LN
3Pages

Catalog excerpts

MEMS Capacitive Accelerometer ► Triaxial ► Ultra Low Noise (LN) ► High g-Range ► 8 or 12 Wire System ► Amplified Output ► Stainless Steel Housing ► Made in Germany Features ► Range: ±2g to ±400g ► DC Response ► Protection Class IP68 ► Salt Water Resistance ► High Shock Resistance ► Gas Damped ► Excellent Bias and Scale Factor Stability ► Differential Mode Options ► Customised Cable Length ► Customised Connector ► TEDS Module Applications ► Wind Energy ► Marine ► Structural Monitoring and Testing ► Endurance Testing ► Brake Test ► Vibration Monitoring ► Civil Engineering ► Modal Analysis ► Vehicle Testing ► Ride Quality & Comfort ► Railway Engineering Capacitive MEMS Technology The accelerometers are based on a capacitive MEMS technology and can be used in a low frequency response up from 0Hz. Inside the sensor element, the seismic mass is connected with two conductive capacitor plates. If the seismic mass oscillates between the two capacitor plates the capacitance will change. This capacitance change is converted via an ASIC (Application Specific Integrated Circuit) into an analog signal. Description The model ASC OS 315LN has been developed for the demanding requirements of offshore applications. The robust housing and the connecting cables are suitable for immersion in salt water and are designed to work at 1m water depth. These ASC accelerometers therefore benefit from the high stability of the chip technology with a low noise level and a low bias and an excellent scale factor temperature coefficient. The ASC OS 315LN is over a wide temperature range fully compensated and factory calibrated. Because capacitive technology is used, extremely small measuring ranges are possible. The amplified output is easy to use with a data acquisition unit. The signal is independent from the power between +8VDC to +30VDC. A very high flexible and rugged cable provides a simple mounting. The ASC OS 315LN is equipped with 1 meter cable as standard. ASC GmbH ■ Advanced Sensors Calibration ■ Ledererstra&e 10 ■ 85276 Pfaffenhofen ■ Germany ■ Tel. +49 (0) 8441 786 547 -0 ■

Open the catalog to page 1

Typical Specifications DYNAMIC Range (±g) 2 5 10 25 50 100 200 400" ELECTRICAL Excitation voltage V DC 8-30 Zero acceleration output ±mV 150 150 80 80 80 80 80 80 Isolation Case Isolated Residual / Broadband noise (±5% frequency range) |jV 100 60 70 90 100 100 125 125 ENVIRONMENTAL Thermal sensitivity shift %/°C 0.015 Thermal zero shift mg/°C 0.15 0.4 0.75 2 4 7.5 15 30 Operating temperature range °C -40°C to +100°C Storage temperature range °C -55°C to +125°C...

Open the catalog to page 2

FACTORY CALIBRATION (SUPPLIED WITH THE SENSOR) Range 2g and 5g 10g 25g 50g and 100g 200g and 400g CALIBRATION DIN ISO 17025 (ORDER SEPARATELY) Range 2g and 5g 10g 25g 50g and 100g 200g and 400g Cable Code /Pin Configuration 8-wiring-System Red Supply + Brown Supply - Grey Signal - Pink Signal - Blue Signal - Model number Range (Ex. 050 is 50g) Cable length (meters) Connector & Pinout ASC GmbH ■ Advanced Sensors Calibration SchafflerstraBe 15 ■ 85276 Pfaffenhofen ■ Germany ■ Tel. +49 (0) 844 1 786 547 -0 ■ office@asc-sensors.de All data,...

Open the catalog to page 3