ASC DiSens® MD
3Pages

{{requestButtons}}

Catalog excerpts

ASC DiSens® MD - 1

Digital Accelerometer ► Triaxial Accelerometer ► Digital Output: EtherCAT ► Daisy Chaining ► Protection Class IP20 ► Software Package included ASC DiSens® MD Features ► Measurement Ranges: ±2g, ±4, ±8g ► DC Response ► High Resolution ► EtherCAT ► Noise Density: 25 pg/srt(Hz) ► High Shock Limit The ASC DiSens® series is a novel ASC sensor solution with digital interfaces. It combines high-quality sensors with an integrated data acquisition system, so that separate data acquisition is no longer necessary. Due to the transmission of digital data, many interferences no longer play a role, which is particularly important for long cable lengths. The series begins with the new MD model, a triaxial digital accelerometer. The sensor has 2g, 4g and 8g measurement ranges, which are set via the integrated software. Options ► Customised Cable Length Applications ► Structural Health Monitoring ► Bridge Monitoring ► Seismic Measurements ► Mobile Network Antenna Structural Monitoring ► Vibration Monitoring on Construction Machines ► Condition Monitoring on Machines and Equipment The acceleration values are transmitted as raw data via the EtherCAT protocol to a host system. There they are processed by a separate analysis software. With an active power supply, up to 12 devices can be connected via daisy chaining. The included DEWESoftX3 software package provides many advantages for the daily test and measurement work such as time savings and easy recording, analysis and reporting. Mechanical Drawing ASC GmbH ■ Ledererstrasse 10 ■ 85276 Pfaffenhofen ■ Germany ■ Tel. +49 8441 786547 0 ■ office@asc-sensors.de

Open the catalog to page 1
ASC DiSens® MD - 2

Typical Specifications ASC DiSens® MD Measurement Range ±2g, ±4g, ±8g (to be set via the integrated software) SPECIFICATIONS OF THE MEMS ACCELEROMETER Residual noise (±2g @ 50Hz bandwith) 100 Residual noise (±2g @ 125Hz bandwith) 150 Offset temp. drift (-40°C to +125°C) -0.15 ±0.02 Sensitivity temp. drift (-40°C to +125°C) ±0.01 Sample rate GENERAL SPECIFICATIONS OF THE ASC DISENS MD Digital Interface EtherCAT PHYSICAL Case material Mounting Weight (without cable) Cable Aluminium 4 x M4 screws 105 gram SFTP, CAT5e, CAT6 ASC GmbH ■ Ledererstrasse 10 ■ 85276 Pfaffenhofen ■ Germany ■ Tel. +49...

Open the catalog to page 2
ASC DiSens® MD - 3

Typical Specifications ASC DiSens® MD INSTALLATION: DAISY CHAINING Devices are daisy chained with a standard network cable. It is recommended that the cable is shielded (SFTP CAT5e) and has a minimum 24 AWG wire thickness. The cable must have 4 wire pairs. The maximum distance node-to-node is 50m. Passive PoEpower injector is necessary for merging the EtherCAT signal and power into a single cable. Passive PoE injector pins 4,5: power + pins 7,8: power - QUALITY ► ASC GmbH is ISO 9001:2015 certified. ► All ASC products are C €-compliant. ASC GmbH Ledererstrasse 10 ■ 85276 Pfaffenhofen ■...

Open the catalog to page 3

All ASC catalogs and technical brochures

  1. ASC 4221MF

    3 Pages

  2. ASC 4211LN

    3 Pages

  3. ASC 4111LN

    3 Pages

  4. ASC 3521MF

    3 Pages

Archived catalogs

  1. ASC OS 215LN

    3 Pages

  2. ASC 76C1

    3 Pages

  3. ASC 75C1

    3 Pages

  4. ASC 62C1

    3 Pages

  5. ASC 74C1

    3 Pages

  6. ASC 66C1

    3 Pages

  7. ASC OS 315LN

    3 Pages

  8. ASC 5721

    3 Pages

  9. ASC 3511LN

    3 Pages

  10. ASC 4221

    3 Pages

  11. ASC 3521

    3 Pages

  12. ASC P401A15

    3 Pages

  13. ASC 61C1

    3 Pages