ASC Angular Rate Sensors ► Uniaxial / Triaxial ► Anodised Aluminium Housing ► IP65/IP67 ► Made in Germany Features ► ±75°/s, ±150°/s, ±300°/s and ±900°/s Rate Ranges ► Low Bias Instability (9°/hr) ► Low Angular Random Walk (0.2°Afhr) ► Low Power Consumption ► High Shock Rejection ► Low g-Sensitivity ► Wide Bandwidth Options ► Customised Cable Length ► Customised Connector Applications ► Precision Navigation and Pointing ► Automotive in-car Navigation ► Precision GPS Vehicle and Personal Navigation Aiding (Dead Reckoning Navigation) ► Vehicle Yaw, Pitch and Roll Rate Sensing ► Gesture Sensing ► Motion Tracking ► Precision Agriculture ► Camera/Antenna/Plattform Stabilisation ► Industrial and Robotics ASC 271 (Uniaxial) ASC 273 (Triaxial) MEMS Vibrating Ring Technology ASC's precision navigation and pointing gyroscopes are made of robust silicon MEMS vibrating ring elements. The gyro detects the magnitude and direction of angular velocity by using the coriolis force effect. As the gyro is rotated, coriolis forces acting on the silicon ring cause radial movement at the ring perimeter, the magnitude of which is proportional to the angular velocity of rotation. The gyro thus produces an analog voltage signal, which is linearly proportional to angular rate. The balanced ring design results in excellent shock and vibration insensitivity. Description ASC's precision navigation and pointing gyros are used typically in industrial environments due to their excellent shock and vibration rejection. ASC's gyroscopes, 271 and 273, feature an anodised aluminium housing, which is light-weight and provides case isolation against ground loops. The sensor sensitivity and bias is extremely stable over a wide temperature range from -40°C to +85°C. ASC's precision navigation and pointing gyros are available in two versions: 271 (Uniaxial) and 273 (Triaxial). ASC 271 (Unaxial) ASC 273 (Triaxial) ASC GmbH ■ Advanced Sensors Calibration ■ LedererstraCe 10 ■ 85276 Pfaffenhofen ■ Germany ■ Tel. +49 (0) 8441 786 547 -0 ■

Typical Specifications MODEL NUMBER: ASC 271 (UNIAXIAL) / ASC 273 (TRIAXIAL) Type: Industrial Grade Gyros DYNAMIC Rate Range (±°/s) Shock limit g 500 (1 ms half-sine) ; 10000 (survival) g-sensitivity (linear acceleration) °/s/g 0.1 ELECTRICAL Excitation voltage V DC Current Consumption mA Bias V Bias variation with temperature °/s (referred to the value at +25°C) Bias Instability °/hr Isolation Rate Noise Density °/s/VHz Angular Random Walk °/Vhr Vibration induced Noise °/s/g2 9 Case Isolated 0.02 0.2 (Allan Deviation; T=1s) 0.08 ENVIRONMENTAL Sensitivity...

A factory calibration certificate is provided with each sensor. A DAkkS certified (Deutsche Akkreditierungsstelle, DAkkS, to DIN EN ISO / IEC 17025) calibration can be provided upon request. Supply + Supply - (GND) Signal ASC 273 Triaxial, 9-Wire X Supply + Supply - (GND) Signal (X) Y Supply + Supply - (GND) Signal (Y) Z Supply + Supply - (GND) Signal (Z) A: open-ended cable (no connector at the DAQ end) Contact ASC for all available connector options such as Lemo, Sub-D, BNC etc. ASC GmbH ■ Advanced Sensors Calibration LedererstraSe 10 ■ 85276 Pfaffenhofen ■ Germany ■ Tel. +49 (0) 8441 786 547...