High temperature setting type ISO 9001 JQ3307A Qualified ISO 14001 JE0970A Qualified 1/2 inch, Automatic Reset type 1/2 inch, Automatic Reset type THERMOSTAT US-625 Application/ Electric oven.Heating unit.LBP etc. Operating temp. 260°C max. f Ceramic case ] us 625AXRLQL cSMus CQC Model code us-625nnnnnn Specification Electrical rating *The differential varies slightly with the operating temperature. * Please contact the Overseas Sec for the details since the types and specifications of the approved models are slightly different from those shown above. *US-625 is adapted to be a S.O.D. with a quick response. Dimensional drawings The material of the bracket stainless steel (other than KO and SO) ■ QO : Aluminum cover , no bracket ■ QE : Aluminum , movable surface bracket ( pitch 23.8mm) ■ QE-FB : Aluminum , fixed surface backet ( pitch 23.8mm) ■ QL : Aluminum , movable surface bracket ( pitch 24.5mm) ■ QL-FB : Aluminum , fixed surface backet ( pitch 24.5mm) ■ KO : Aluminum , air stream backet (depth 5.0mm , 24.5mm) ■GO : Aluminum , air stream backet (depth 5.4mm , 24.5mm) ■ MO : Stainless cover , no bracket (with 012 hole type) ■JO : Stainless , air stream backet (depth 5.2mm , 24.5mm) ■ QD : Aluminum , movable surface bracket ( pitch 30.0mm) ■ DO : Aluminum cover , No bracket (with 012 hole type) ■ NO : Aluminum cover , no bracket (with frange type) ■ L : Equivalent to Positive Lock Connector 250 series (size : 6.35xt0.8 material:brass , Ni-plated) — G : Equivalent to Positive Lock Connector 250 series (size : 6.35xt0.8 material:steel , Ni-plated) -M : Equivalent to Positive Lock Connector 187 series (size : 4.75xt 0.5 material:brass , Ni-plated) Terminal H : Equivalent to Positive Lock Connector 187 series type (size : 4.75xt 0.5 material:steel , Ni-plated) ■)K H : Combination of horizontal terminal (R) — V : Equivalents IEC 60730-1 quasi-terminal (size :4.8xt 0.8 material:brass , Ni-plated) : Equivalent to DIN46244 (size :4.8xt 0.8 material:brass , Ni-plated) _I : Fixed screw mount (steel t 0.8 , Ni-plated ) ■)K I : Combination of horizontal terminal (R) S : For soldering (Brass t 0.5 , Sn-plated) R : Horizontal terminal Cover ■ mounting bracket type Terminal angle Contact type T : Vertical terminal X : Open on temperature rise Y : Close on temperature rise A:Ag'Ag alloy contact / standerd case (Type A) K : Au cross bar contact / standerd case (Type K) ■)K Above dimention is applied for US-625 ■)K For Cover and bracket model, please refer to page 16.

Movable bracket (FREE) Aluminum (t 0.4) cover Iron (t 0.3) Chromate plating bracket Stainless (t 0.25) cover Stainless (t 0.3) bracket The combination of US-622,621,625 is not allowed Fixed bracket (FIXED) Aluminum (t 0.4) cover Stainless (t 0.3) bracket Aluminum (t 0.4) cover Aluminum (t 0.5) Buried bracket Aluminum (t 0.4) Buried bracket QE-FB Product standards handling notes etc. Stainless (t 0.25) Buried bracket Stainless (t 0.25) Buried bracket Aluminum (t 0.4) cover Aluminum (t 0.5) cover