wire rope
4Pages

You r dreams. Wove n togeth e r. /A /\S/\HI INTECC Wire_rope Asahi Intecc makes full use of the proprietary wire processing technologies, such as ultra thin wire drawing and die forming to manufacture fine stainless-steel wires with diameters from 0.013mm to 0.50mm.

You r dreams. Wove n togeth e r. A stainless steel wire rope assembly may be sprayed, dipped, or extruded with PTFE, Nylon, and other coatings for your particular abrasion-resistance, lubricity, low coefficient of friction, and long-term durability requirements. Asahi Intecc can precisely mask the ends of the coated stainless steel cable assemblies in order to attach in-house various iron (FE), stainless steel (SUS, SS), Aluminum (AL), Copper (Cu), and other metallic finishes. Legend 5 = Highest applicability 1 = Lowest applicability

Wire rope – End terminations Eyelets, threaded screws, or balls may be crimped, laser welded, soldered, pressed, caulked, or swaged onto the ends of stainless steel cables to optimize mechanical performance and comply with space requirements. Asahi Intecc engineers carefully review both initial tension and initial cable elongation, and wire rope elongation after bending a number of cycles as well as the breakload to help clients select the correct terminal and stainless cable configuration. Loop end Mainly used in connection to a pin or a screw. Wire rope stake eyes can be bent to any...

Machining & Assembly Processing on surface Swaging process We can decrease O. D. without both I. D. change and decrease of stiffness by beating surface of rope. It improves the anti-elongation spec., too. Flat-grinding process We can perform Flat-grinding on surface of rope in whole length . It improves flexibility of rope without changing I. D.. Auger We can set additional filar on rope. This structure adds the transportation function to rope. Marking process We can put marking to make clear the its position of the wire rope. End treatment Electric discharge method This method makes...