Datasheet : Coating : Inner You r dreams. Wove n togeth e r. /A /\S/\HI INTECC Outer cable : Torque coil, ACT ONE, etc. Inner tube : Fluoropolymer and PEBAX layer The Inner tube is designed for internal coating applied to hollow cable tubes like ACT ONE, Torque coil, or Wire coil for adding lubricity, chemical isolation, or surface preparation to the inside of the hollow cable. Ideal for applications requires lumen lubricity, sealing, or chemical resistance, for customers developing a delivery system. Minimum wall thickness (including Fluoropolymer and PEBAX layer) *It depends on Inner tube ID as below, which is not include tolerance. Coating material (Fluoropolymer layer) - PTFE greatest lubricity and chemical resistance - PFA similar in chemical resistance to PTFE, but less lubricity - FEP similar to PFA, slightly less susceptible to water absorption than others - ETFE greatest strength and abrasion resistance End treatment of inner tube manually cut using utility knife End treatment of outer cable EDM cut, chamfering