Series 10 Electric Actuator
2Pages

{{requestButtons}}

Catalog excerpts

Series 10 Electric Actuator - 1

Series 10 Electric Actuator Specifications Torque: 1,320-26,040 in/lbs. Voltage: 120 VAC 1Ph 50/60 Hz Amp Draw: 1.65 – 4.20 Conduit Entry: Two (2) 3/4” FNPT Max Ambient Temperature: 150º F Limit Switches: Four (4) single pole, double throw (4-SPDT) 10 amp rated Torque Switches: Two (2) single pole, double throw (4-SPDT) 10 Amp rated Cycle Time per 90º: 21– 93 seconds Standard Features • Motor: Reversing, squirrel cage induction motor, 115 VAC 50/60 Hz, single phase • Overload protection: Integral thermal overload protection for motor windings with automatic reset • Gear train: Permanently lubricated • Conduit: Two 3/4” FNPT conduit entries to eliminate cross feed between control and power signals • Declutchable manual override: Lockable de-clutching lever with handwheel • Limit switches: Standard end of travel limit switches can be used for light indication (not to be used with PLC for position confirmation) • Auxiliary (Additional) limit switches: Each electric actuator is provided as a standard with two SPDT auxiliary limit switches • Torque Switches: two SPDT torque switches • Mechanical Stops: Two +/- 10 percent mechanical travel stops • Enclosure: Weatherproof rated Type 4X and 6 • AWWA C542: Conforms to AWWA C542 • Self-Locking: Self-locking worm gear design eliminates the need for a mechanical brake • Space Heater: A space heater is provided as standard equipment • Output torque: Series 10 electric actuators have an output torque range from 1,320 in./lbs. to 26,040 in./lbs. • Corrosion resistant mounting: Mounting is with stainless steel bracket, stainless steel coupling, and stainless steel hardware • Captivated SS socket cap cover screws Sample Specifications All Series 10 electric actuators shall have a thermally protected, bidirectional (reversing type), squirrel cage induction motor with a permanently lubricated gear train. Actuator shall have self-locking worm gearing encompassed in a die cast aluminum housing anodized inside and outside, with an external polyester powder coat finish, rated Type 4X and 6. Each actuator shall have a lockable manual override, visual position indication, two auxiliary limit switches, two torque switches and a space heater, as supplied by Asahi/America, Inc. • Positioner: 4-20 mA or 0-10 VDC input • 4-20 mA output transmitter • Two-wire control • Voltages: 230/1, 380/3, 460/3, 24 VDC • ModBus • ATEX enclosure • Local remote station

Open the catalog to page 1
Series 10 Electric Actuator - 2

Series 10 Electric Actuator Engineering Data Model Torque (in/lbs.) Cycle Time per Amp Duty Amp Duty 90 Degrees Draw Cycle Draw Cycle ( Seconds)* Duty Cycle Duty Cycle Duty Cycle *Cycle times are approximate www.asahi-america.com • asahi@asahi-america.com • Tel: 800-343-3618 • 781-321-5409 • Fax: 800-426-7058 2

Open the catalog to page 2

All Asahi/America catalogs and technical brochures

  1. PDCPD

    2 Pages

  2. Pool-Pro

    2 Pages

  3. 92 series

    1 Pages

  4. 64 series

    1 Pages

  5. PA series

    2 Pages

  6. 56D/75D

    1 Pages

  7. 10 series

    2 Pages

  8. 94 series

    2 Pages

  9. 92 series

    2 Pages

  10. 87 series

    1 Pages