87 series
1Pages

Catalog excerpts

Specifications Size: E87,F87 Torque: 5000-10,000 in/lbs Voltage: 120 VAC 1 Ph 50/60Hz AMP Draw: E87 1,7 F87 2.2 Conduit Entry: Two (2) 3.4" FNPT Max Ambient Temp: 150º F Switches: Four (4) single pole, double throw (4-SPDT) 15 amp rated Cycle Time per 90º: E87, F87 30 seconds Series 87 Electric Actuator Standard Features • Motor: Reversing, brushless, capacitor run 115 VAC • • • • • 50/60 Hz, single phase Overload protection: Integral thermal overload protection for motor windings with automatic reset Gear train: Permanently lubricated Conduit: Two 3/4” FNPT conduit entries to eliminate cross feed between control and power signals Manual override: Push down on handwheel until engaged with cam and rotate Limit switches: Standard end of travel limit switches can be used for light indication (not to be use with PLC for position confirmation) Auxiliary (Additional) limit switches: Each electric actuator is provided as a standard with 2-SPDT auxiliary limit switches Enclosure: Type 4X Mechanical Brake: Each electric actuator is provided as a standard with a mechanical brake Corrosion resistant mounting: Mounting is with stainless steel bracket, stainless steel coupling, and stainless steel hardware Output torque: Series 87 Electric Actuators have an output torque range from 5000 in/lbs to 10,000 in/lbs PTC Space Heater: A PTC (Positive Temperature Coefficient) space heater is provided as standard equipment Options • Two-wire control • Center-off • Voltages 10.0 CLEARANCE FOR COVER REMOVAL Sample Specification All Series 87 electric actuators shall have a thermally protected, bi-directional (reversing type), capacitor run motor with a permanently lubricated gear train. Actuator shall have planetary gearing encompassed in an die-cast aluminum housing with stainless steel trim, conforming to Type 4X. Each actuator shall have a manual override, visual position indication, two (2) auxiliary limit switches, a PTC heater and a mechanical brake as supplied by Asahi/America. Engineering Data ENGINEERING DATA Cycle Time per Weight Model 90 (lbs) Torque Amp Duty Amp Duty Degrees (in/lbs) Draw Cycle Draw Cycle (seconds) E87 5,000 1.7 50% 1.0 50% 30 34 F87 10,000 2.2 50% 1.2 50% 30 34 115 Vac • Local Remote Station

Open the catalog to page 1

87 series 1Pages

Catalog excerpts

All Asahi/America catalogs and technical brochures

87 series
1Pages