Brazed Plate Heat Exchangers E Series This data sheet shows a technical overview of our products. Please contact us if more exact information is needed. As we are constantly improving our products, their characteristics, dimensions and weights may also change, although we do our best to incorporate these changes continually. The information in this data sheet is intended to be used as a first general guideline only. asa assumes no liability for any information therein, any errors, omissions, misprints, nor any direct or indirect damages, losses or costs resulting therefrom. The cooling performance and the general technical values indicated in this catalogue are measured at a test bench according to asa testing procedures. Because there is no standardized testing procedure, tests used by other manufacturers could have different results. Due to different conditions in testing and application environments the cooling performance may also vary by +/- 15%. Therefore we recommend all coolers to be checked under the system operating conditions. This is also true of vibrations and mechanical stress as well as for pressure peaks and thermal stress and any other relevant factors. © asa hydraulik, June 2015

Brazed Plate Heat ExchangersE Series Progress In Cooling The asa E plate heat exchanger is designed for both cooling and heating applications. It is commonly used to cool hydraulic fluid and lubricating oil and can be used for water, air, steam and gas applications. The benefits of asa E plate heat exchangers are: • strength • safety • downsizing • high thermal efficiency • low maintenance • no gaskets - no leaks The asa E plate heat exchanger is designed for maximum heat transfer using profiled plates of acid proof stainless steel. The plates form channels through which oil and water pass (alternating...

Brazed Plate Heat ExchangersE Series Performance The shown performance curves were created with an oil/water ratio of 2:1 with hydraulic oil ISO VG32 at an oil inlet temperature of 60°C and a water inlet of 20°C. Please contact us for other technical parameters to select the optimal cooler for you. pressure drop Mounting Brackets bracket order number [mm] [mm] [mm] [mm] [mm] [kg] with mounted bracket Please contact us to select the optimal options or get further information at www.asahydraulik.com or [email protected] . Please read manual before installation! This data sheet shows a technical...

Brazed Plate Heat Exchangers E Series This data sheet shows a technical overview of our products. Please contact us if more exact information is needed. As we are constantly improving our products, their characteristics, dimensions and weights may also change, although we do our best to incorporate these changes continually. The information in this data sheet is intended to be used as a first general guideline only. asa assumes no liability for any information therein, any errors, omissions, misprints, nor any direct or indirect damages, losses or costs resulting therefrom. The cooling performance...