- Catalogs
- A.S. Exclusiv Rüdiger Rom
- Hot-Melt Spray System AS-5060-P-LCD
Hot-Melt Spray System AS-5060-P-LCD
Hot-Melt Spray System AS-5060-P-LCD
The Hot-Melt Spray System AS-5060-P-LCD is designed for handling both high and low viscous hot melt adhesives without the need for a dissolver. It supports applications in both dot and line formats and includes a workstation equipped with two pressure regulators and two manometers for precise control.
Specifications
- Weight: 1200g
- Power Supply: 230 V / 50 Hz
- Power Consumption: 600 Watt
- Current Consumption: 1.75 A
- Degree of Protection: I
- Class of Protection: IP 30
- Temperature Control: Electronic
- Temperature Limitation: Temperature monitor
- Operating Temperature: 50-210°C
- Consistency of Temperature: +/- 2°C
- Temperature Indication: Digital
- Heat-up Time: Approx. 3-10 min
- Gross Tank Capacity: 250 ml
- Conveying System: Air pressure
- Operating Pressure: 0.5 - 6 bar
- Length of Electric Cord: 4 m
- Length of Connections (stand to handgun): 4.5 m
- Recommended Melts: Hot-melt granulate, pillows, and 43mm slugs
Features
- The system includes an integrated pneumatic stabilizer and a manometer display for adjusting spraying pressure and quantity.
- The electronic temperature adjustment control unit is integrated into the grip for optimal handling temperature, preventing coking or cracking of adhesives.
- The digital LCD temperature display shows the preset temperature continuously during operation.
Included Components
- Mounting of nozzle for spraying
- Mounting of nozzle for dots and lines
Catalog excerpts
A.S. Exclusiv • Rudiger Rom • Gabelsbergerstr. 31 m ■ 50674 Koln - Tel. 0221 -446644 • Fax 0221 -446633 The spray system AS-5060-P-LCD allows the handling of high- and low viscous hot melt adhesives without the usage of any dissolver. The application can be dots or line type. The workstation comes with an integrated pneumatic stabilizer as well as a manometer display (for spraying pressure and quantity adjustments). The fine tuning of the compressed air guarantees an optimal and exact hot melt application. The manometer display enables the user to adjust and control the preset air pressure at all times. The electronic temperature adjustment control unit has been integrated into the grip to complete the functional design of the spray applicator. It ensures the optimal handling temperature of the hot melt adhesives (no coking/ cracking). The digital temperature display (LCD) shows the preset temperature at all times during the handling process.
Open the catalog to page 1
A.S. Exclusiv ■ Rudiger Rom • Gabelsbergerstr. 31 Technical Data AS-5060-P-LCD Weight Power Supply Power Consumption Current Consumption Degree of protection Class of protection Temperature control Temperature limitation Operating temperature Consistency of temperature Temperature indication Heat-up-time GrossTank Capacity Conveying system Operating pressure Length of electric cord Length of connections (stand to handgun) Recommended melts 1200g 230 V / 50 Hz 600 Watt 1,75 A I IP 30 Electronic Temperature monitor 50-210°C +/- 2°C digital approx. 3-10 min. 250 ml Air pressure 0,5 - 6 bar 4 m 4,5...
Open the catalog to page 2
