Universal frame fixing SXR-T
6Pages

The economical all-rounder with European Technical Approval (ETA) for solid and hollow building materials VERSIONS APPROVALS ▪ zinc-plated steel ▪ stainless steel BUILDING MATERIALS Approved for: ▪ Concrete C12/15 ▪ Vertically perforated brick ▪ Hollow blocks made from lightweight concrete ▪ Perforated sand-lime brick ▪ Solid sand-lime brick ▪ Aerated concrete ▪ Solid block made from lightweight and normal weight concrete ▪ Solid brick ▪ Thermal insulation blocks Also suitable for: ▪ Natural stone with dense structure ▪ Solid panel made from gypsum ADVANTAGES APPLICATIONS FUNCTIONING ▪ The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50mm, ensuring an economical fixing. ▪ The ETA approval covers use in a range of solid and hollow building materials, and guarantees a secure fixing. ▪ The specially developed combination of plugs and screws ensures the very best handling. The plug has a noticeable hold, making installation more convenient. ▪ The extensive range with diameters of 6, 8 and 10mm offers the right plug for every fixing. ▪ Façade, ceiling and roof substructures made of wood and metal ▪ Windows ▪ Doors and gates ▪ Wardrobes ▪ Cable trays ▪ Squared timbers ▪ Kitchen cabinets Frame fixings / Stand-off installation Universal frame fixing SXR-T ▪ The SXR is suitable for push-through installation. ▪ The SXR expands in solid building materials and knots in hollow building materials. ▪ With vertically perforated bricks, only use rotary drilling (no impact drilling). ▪ Countersunk head screws are recommended for the installation of timber constructions; in the case of metal constructions, use plugs with a wide sleeve rim and a moulded washer on the screw, which also features an integrated hexagon socket. http://www.fischerwerke.de/en/ - 16/07/2012 1

Frame fixings / Stand-off installation Universal frame fixing SXR-T TECHNICAL DATA Universal frame fixing SXR-T Approval galvanized Article name SXR 8 x 60 T SXR 8 x 80 T SXR 8 x 100 T SXR 8 x 120 T SXR 10 x 80 T SXR 10 x 100 T SXR 10 x 120 T SXR 10 x 140 T SXR 10 x 160 T SXR 10 x 180 T SXR 10 x 200 T SXR 10 x 230 T SXR 10 x 260 T Art.-No. 502999 503000 503001 503002 046263 046264 046265 046266 046267 046268 046269 046270 046271 ● ● ● ● ● ● ● ● ● ● ● ● ● ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Drill hole diameter Anchor length Max. fixture thickness do l t fix [mm] 8 8 8 8 10 10 10 10 10 10 10 10 10 [mm]...

Approval hot dipped galvanized Article name Art.-No. 509534 509535 509536 http://www.fischerwerke.de/en/ - 16/07/2012 Drill hole diameter Anchor length Max. fixture thickness do l t fix [mm] 10 10 10 [mm] 100 120 140 [mm] 50 70 90 Frame fixings / Stand-off installation Universal frame fixing SXR-T 3

SXR 10 x 230 FUS SXR 10 x 230 FUS SXR 10 x 260 FUS SXR 10 x 260 FUS — 046337 046338 — 046363 — — 046364 ▯ ▯ ▯ ▯ ■ ■ ■ ■ 10 10 10 10 Universal frame fixing SXR-T 240 240 270 270 50 50 50 50 230 230 260 260 180 180 210 210 SW 13 T40/SW13 T40/SW13 SW 13 50 50 50 50 LOADS Frame xing SXR 4) Highest permissible loads1) for a single anchor for multiple xings of facades in normal concrete ≥ C12/15 resp. ≥ B15. For the design the complete approval Z-21.2-1862 has to be considered. Type Cracked or Non-cracked concrete Min. spacing Min. edge distance 2) 3) Permissible load h (d) cmin (ar) 2) [mm]...

Highest permissible loads11 for a single anchor for multiple fixings of non-structural applications in normal concrete > C1 2/1 5 resp. B1 5. For the design the complete approval ETA-07/01 21 has to be considered 11 The required partial safety factors for material resistance as well as a partial safety factor for load actions of = 1,4 are considered. Z) Minimum possible axial spacings resp. edge distance for concrete > CI 6/20 while reducing the permissible load. J) For combinations of tensile loads, shear loads, bending moments as well as reduced edge distances or spacings (anchor groups)...

Highest permissible loads11 for a single anchor for multiple fixings of non-structural applications in masonry. For the design the complete approval ETA-07/0121 has to be considered The required partial safety factors for material resistance as well as a partial safety factor for load actions of Ji = 1,4 are considered. Minimum possible axial spacing (anchor group) while reducing the permissible load. Valid for tensile load, shear load and oblique load under any angle. For combinations of tensile loads, shear loads and bending moments see approval. gvz and A4. For exterior applications of...