The powerful nylon plug with 4-way expansion BUILDING MATERIALS General fixings Expansion plug SX APPROVALS ▪ Concrete ▪ Vertically perforated brick ▪ Hollow block made from lightweight concrete ▪ Cavity floor slabs made of brick, concrete, etc. ▪ Perforated sand-lime brick ▪ Solid sand-lime brick ▪ Natural stone with dense structure ▪ Aerated concrete ▪ Solid panel made from gypsum ▪ Solid brick made from lightweight concrete ▪ Solid brick ADVANTAGES APPLICATIONS FUNCTIONING ▪ The 4-way expansion provides the optimum force distribution in the material, and offers high loadbearing capacities in solid and hollow building materials. ▪ The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster. ▪ The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation. ▪ The greater anchorage depth of the SX 6x50, 8x65 and 10x80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster. ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ The SX is suitable for pre-positioned and push-through installation. ▪ When turning in the screw, the SX expands in four directions, thus providing a secure anchoring in the building material. ▪ The required screw length is given by: Plug length + fixture thickness + 1xscrew diameter. ▪ Suitable for wood, chipboard and spacing screws (fischer ASL, see page). http://www.fischerwerke.de/en/ - 16/07/2012 Lighting Wall cabinets Wardrobes Letterboxes TV consoles Trellis Folding shutters Handrails Light wells Bath and toilet installations 1

Highest recommended loads11 for a single anchor The given loads are valid for wood screws with the specified diameter 11 Includes the safety factor 7 Z) Valid for tensile load, shear load and oblique load under any angle.