- Catalogs
- ARTS Energy
- VRE F
VRE F
VRE F
The document outlines the use of ARTS Energy's battery technology in professional electronics, professional lighting equipment, and military equipment.
The batteries offer excellent cycling performance, high power, superior robustness, and can operate in extreme low temperatures down to -40°C.
The batteries utilize a sintered positive electrode and a plastic bonded negative electrode. ARTS Energy provides both custom-designed and standardized battery packs to meet customer requirements.
The nominal voltage is 1.2V with a typical capacity of 8800 mAh and an IEC minimum capacity of 8000 mAh. The impedance at 1000 Hz is less than 4 mΩ.
The battery dimensions are a diameter of 32.15 ± 0.10 mm, height of 88.8 ± 0.4 mm, top projection of 1.4 ± 0.4 mm, and a top flat area diameter of 5.6 ± 0.1 mm. The weight is 221 g.
Fast charging is allowed between 0 to +40°C with a maximum current of 2.7A. Topping and trickle charge conditions require consultation with ARTS Energy. Charging below 0°C is possible from -40 to 0°C with ARTS Energy's guidance. Fast charge cut-off is required using -dV or dT°C/dt methods.
The batteries can discharge at 40A max between 10 to +60°C, at 1C max between -30 to +60°C, and at C/2 max between -40 to +60°C.
The batteries have a cycling life duration of over 1000 full cycles at 100% Depth of Discharge (DOD).
Recommended storage conditions are between +5°C to +25°C with a relative humidity of 65 ± 5%.
The document emphasizes the importance of adhering to ARTS Energy's technical recommendations for optimal performance. Data is subject to change and becomes contractual only after written confirmation by ARTS Energy.
Catalog excerpts
ARTS Energy's VRE standard Ni-Cd series are perfectly suited to cycling applications. It is designed for a wide range of applications requiring a high level of robustness. To meet customers' requirements, ARTS Energy provides custom-designed and standardised battery packs. For your battery design and system needs, please contact ARTS Energy's engineers. Nominal voltage (V) Typical capacity (mAh)* IEC minimum capacity (mAh)* IEC designation Impedance at 1000 Hz (mQ) * Charge 16 h at C/10, discharge at C/5. • Professional electronics • Professional lighting equipment • Military equipment • Excellent cycling performance • High power • Superior robustness • Extreme low temperatures (-40°C) Diameter (mm) Height (mm) Top projection (mm) Top flat area diameter (mm) Weight (g) Dimensions are given for bare cells. CHARGE CONDITIONS Fast Topping (after fast charge) Trickle (after topping) Charge below 0°C End of Fast charge cut-off is requested: -dV or dT°C/dt 0 to + 40 Consult ARTS Energy 0 to + 40 Consult ARTS Energy -40 to 0 Consult ARTS Energy CYCLING CONDITIONS • Sintered positive electrode • Plastic bonded negative electrode Cycling Life duration Full cycles (100% DOD) > 1000 cycles
Open the catalog to page 1
For graphs shown, C is the IEC5 capacity. Voltage during charge 1.6 Voltage during discharge, after charge at C/10 1.6 Voltage during discharge, after charge at C/3 1.6 32.15 Typical dimensions (mm). Without tube. The operation of the battery must strictly be in accordance with ARTS Energy technical recommendations, to obtain the performances stated by ARTS Energy. Data is given for single cells. Please consult ARTS Energy for utilisation of cells outside specification. Data in this document is subject to change without notice and become contractual only after written confirmation by ARTS Energy....
Open the catalog to page 2All ARTS Energy catalogs and technical brochures
VRE range4 Pages
Long life Lithium ion cells4 Pages
VRE D 55002 Pages
VRE 1/2D2 Pages
ecolife™ MH AA2 Pages
ecolife™ MH Cs2 Pages