C Programmable Analog In Remote I/O Module Features • C Programmable analog input remote I/O module • 1 x 10/100Mbps Ethernet port • 8 x 16-bit A/D, isolation up to 2500Vrms • 1 x relay output • Form A or Form B relay with contact rating 30VDC@1A or [email protected] • Support lwIP and BSD socket library • Support tiny web server • Windows configuration utility included • Toolchain: Sourcery CodeBench Lite or Keil from ARM S/W specification CPU / Memory • CPU: NXP LPC1768 Cortex-M3 100MHz • Memory: 512KB on-chip Flash, 64KB SRAM N etwork Interface • Type: 1 x 10/100Mbps, RJ45 connector • Protection: 1.5KV Magnetic isolation • Protocol Stacks: IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, HTTP • Device Drivers: SD / MMC, UART, Real Time Clock, Buzzer, Digital I/O, Ethernet, Watchdog Timer Windows Utility Functionalities • Broadcast search Isolation Analog Input • No. of Channels: 8 • Input Type: Differential input • Input Mode: Voltage / Current • Resolution: 16-bit • Input Range: Unipolar: 0~150mV, 0~500mV, 0~1V, 0~5V, 0~10V Bipolar: +/-150mV, +/-500mV, +/-1V, +/- 5V, +/-10V Current: 0~20mA • Input Impedance: 20M Ohm (voltage), 120 Ohm (current) • Accuracy: +/-0.1% FSR • Isolation: 2500VDC Relay Output • No. of Channels: 1 • Contact Rating: 30VDC@1A or [email protected] General • Power: 9~48VDC terminal block • Protection: Auto polarity and surge protect • Dimensions (W x H x D): 78 x 108 x 25mm Front View • User web page conversion Ordering Information • RIO-2017PG C Programmable Analog Input Remote I/O Module • DK-35A (36-DK35A-000) DIN RAIL Mounting Kit • PWR-12V-1A (31-62100-000) 110~240VAC to 12VDC 1A Power Adapter