RIO-2015PG
1 /1Page

RIO-2015PG

RIO-2015PG
1 /1Page

Catalog excerpts

RIO-2015PG-1

C Programmable Remote I/O Module RIO-2015PG C Programmable Remote I/O Module Features • 4 x Opto-isolated digital inputs • 2 x Relay outputs • Free RTOS real-time operating system • 4 x Isolation Analog inputs, 2 x Isolation Analog outputs • 1 x Maxim 1-Wire interface • 1 x 10/100Mbps Ethernet interface • 1 x Isolation RS-485 port, 1 Serial Console / RS-232 port • 1 x microSD card interface • Support lwIP and BSD socket library • Support tiny web server • Windows configuration utility included • Toolchain: Atmel Studio Stepi) Install Atmel Studio and Manager H/W Specifications CPU / Memory • CPU: Atmel SAM4E16E Cortex M4 SoC 120MHz • Memory: 128KB SRAM, 1MB Flash inside SoC 128KB SRAM, 2MB Flash on board via SPI expansion Network Interface • Type: 1 x 10/100 Mbps Ethernet, RJ45 connector • Protection: 1.5KV magnetic isolation Serial Ports • Serial Console / RS-232 x 1 • RS-485 1500Vrms isolated x 1 Mass Storage • microSD socket inside x 1 Isolated Analog Input • No. of Channel: 4 • Input Type: Differential input • Input Mode: Current / Voltage • Resolution: 16-bit • Input Range: Unipolar: 0~150 mV, 0~500 mV, 0~1V, 0~5V, 0~10V Bipolar: +/-150 mV, +/-500 mV, +/-1V, +/-5V, +/-10V Current: 0~20mA • Input Impedance: 20M Ohm (voltage), 120 Ohm (current) • Accuracy: +/-0.1% FSR • Isolated: 1500Vrms Isolated Analog Output • No. of Channels: 2 • Output Mode: Current / Voltage • Resolution: 16-bit • Output Range: Unipolar: 0~5V, 0~10V Bipolar: +/-5V, +/-10V Current: 4~20mA, 0~20mA, 0~24mA • Accuracy: +/-0.25% FSR (voltage) +/-0.2% FSR (current) • Load Resistor: 0~1k Ohm • Isolation: 1500Vrms Isolation Digital Input • No. of Channels: 4 • Isolation protection: 2500Vrms • Logical High: 5~24VDC • Logical Low: 0~1.5VDC • LED indicator: Yes Relay Output • No. of Channels: 2 • Contact Rating: 30VDC@1A or [email protected] • LED Indicator: Yes Maxim 1-Wire Interface • No. of Channels: 1 • Connector : 3-pin terminal block (VDD, DQ, GND) General • Power Input: 9~48VDC • Operating Temperature: 0~70°C • Dimension (WxLxH): 115.7x121.5x435mm (4.56 x 4.78 x 1.69in) • Weight: 242g (0.53lb) • Installation: DIN-rail mounting Windows Utility Software Example Program Users only need to write application main program user_main (), web interface, interactive AJAX.C and home page HTML Step3^ Upload the compiled binaries and web pages |Step^ Reboot the application Front View Ordering Information • RIO-2015PG C Programmable Remote I/O Module • CBL-F10M9-20 (91-0P9M9-001) Console Cable (10Pin Header to DB9 Male, 20cm) • DS18B20 (91-6DS18-001) Programmable Resolution 1-wire Digital Thermometer • PWR-12V-1A (31-62100-000) 110~240VAC to 12VDC 1A Power Adapter www.artila.com Artila Artila

 Open the catalog to page 1

All Artila Electronics catalogs and technical brochures

  1. RIO-2017PG

    1  Page

  2. RIO-2014PG

    1  Page

  3. RIO-2010PG

    1  Page

  4. M-506

    1  Page

  5. M-606

    1  Page

  6. M-A5D35

    2  Pages

  7. M-X6ULL

    2  Pages

  8. HC-3120

    2  Pages

  9. APORT-214PG

    1  Page

  10. Matrix-504

    1  Page

  11. Artila catalog

    44  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.