Features • NXP LPC1768 ARM Cortex-M3 100MHz CPU • 512KB on-chip Flash and 64KB SRAM • 1 x full modem RS-232 and 1 x isolated RS-485 serial port • 1 x 10/100Mbps Ethernet port • 1 x serial console port • Support lwIP and BSD socket library • Support tiny web server • Windows configuration utility included • Toolchain: Sourcery CodeBench Lite or Keil from ARM H/W Specifications CPU / Memory • CPU: NXP LPC1768 Cortex-M3 100MHz • Memory: 512KB on-chip Flash, 64KB SRAM Network Interface • Type: 1 x 10/100Mbps Ethernet, RJ45 connector • Protection: 1.5KV magnetic isolation Serial Ports • Port 1: RS-232 full modem • Port 2: RS-485 2500Vrms isolated • Console: RS-232 three wires Serial Port Parameters • Baud Rate: 1.2~921.6Kbps • Flow Control: None / Hardware / Xon_Xoff • Data Bits: 5 to 8 • Stop Bits: 1 to 2 • Protection: 15KV ESD Isolation Digital Input • No. of Channels: 16 • Photo Isolation (AC in): 2500Vrms • Logical High: 5~24VDC • Logical Low: 0~1.5VDC • Input Resistance: 1.2k [email protected] Relay Output • No. of Channels: 8 • Contact Rating: 30VDC@1A or [email protected] General • Temperature Sensor: Maxim DS18B20 (optional accessary 91-6DS18-001) • Temperature Range: -55°C~125°C • Accuracy: +/-0.5°C • Real Time Clock: Manual or NTP (Network Time Protocol) setup and sync. • Power: 9~48VDC power jack and terminal block • Dimensions (W x H x D): 182 x 118 x 35.82mm • Operating Temperature: 0~70°C • Storage Temperature: -20~85°C Windows Utility Software Mprirdp IBM i'i"j-1 ffQCCtoUtpig tUi 1*f I T| Jll| Example Program Pin Assignment Ordering Information • RIO-2010PG Programmable Remote I/O Module • CBL-F10M9-20 (91-0P9M9-001) Console Cable (10Pin Header to DB9 Male, 20cm) • DS18B20 (91-6DS18-001) Programmable Resolution 1-wire Digital Thermometer • PWR-12V-1A (31-62100-000) 110~240VAC to 12VDC 1A Power Adapter