COM 3/4 Console Touch Screen LCD Controls Audio Out 128MB Flash 128MB SDRAM Features • ATMEL 400MHz AT91SAM9G45 CPU w/ MMU • Windows CE 6.0 with file system • 128MB SDRAM and 256MB NAND Flash • 2MB DataFlash for system recovery • On-board real-time clock w/ backup battery • Supports up to 1280 x 860 LCD and touch screen • Supports LVDS • 1 x 10/100Mbps Ethernet • 3 x RS-232 ports, 1 x RS-422 / 485 port • 4 x USB 2.0 hosts supporting high speed of 480Mbps H/W Specifications CPU / Memory • CPU: ATMEL 400MHz AT91SAM9G45 w/ MMU • Memory: 128MB SDRAM, 256MB NAND Flash • DataFlash®: 2MB, for system backup Network interface • Type: 1 x 10/100Mbps Ethernet, RJ45 connector • Protection: 1.5KV magnetic isolation tty (Serial) Ports • 3 x RS-232 (Port 1,3, 4) • 1 x RS-422 / 485 (Port 2) • Connector: 1 x DB9 and 2 x 10 pins header (male) for RS-232 Terminal Block for RS-422 / 485 TTY (Serial) Port Parameters • Baud Rate: Up to 921.6Kbps • Parity: None, Even, Odd, Mark, Space • Data Bits: 5, 6, 7, 8 • Stop Bits: 1, 1.5, 2 • Flow Control: RTS / CTS, XON / XOFF, None • RS-485 Direction Control: Auto, by hardware USB Ports • Host Ports: 4, USB 2.0 compliant • Speed: Supports low-speed (1.5Mbps), full-speed (12Mbps) and high-speed (480Mbps) • Client Port: 1 x USB 2.0 • Speed: High-speed (480Mbps) Display interface • LCD Resolution: Up to 1280 x 860 TFT • Interface Signal: 24-bit TTL / CMOS and LVDS • Touch Screen: 4-wire touch screen GPIO (General-purpose I/Os) • No. of Pins: 4 • Signal Level: CMOS / TTL compatible • Each pin can be programmed as input or output General • Watchdog Timer: Yes • Real Time Clock: Yes, with backup battery • Buzzer: Yes • Power Input: 12~40VDC • Power Consumption: 200mA@12VDC • Board Dimensions (W x H): 146 x 120mm • Operating Temperature: 0~70°C (32~158°F) S/W Specifications General • OS: Windows CE 6.0 • RAM-based File System: Up to 94MB free space available • NAND-based File System: Up to 200MB free space available Ready-to-use Network Services • Web Server: Supports ASP • Telnet Server • FTP Server Application Development & Deployment • Development: It is recommended to use Microsoft Visual Studio 2005 for application development. The M-606 comes with its own SDK for C / C++ programming language. • Deployment: The application program can be transferred to the M-606 either by ActiveSync or USB pen drive locally or by FTP remotely. Ordering Information • M-606 WinCE 6.0 ARM9 Single Board Computer