Artidor brochure 2018
37Pages

Explosion-safe Motion Sensor AR-021Based on radar detection technology Features • ATEX-certified • Suitable for use in locations with gas and dust, zone 2 and 22 • Ingress protection level IP66 • Coated aluminum housing • Max. output power up to 2,000 VA • Opening angle of 140° • Detection range adjustable from 1 - 8 m • Light sensitivity adjustable from 2 - 2,000 lux • Mounting bracket included fr \ II 3 G Ex nR IIC T6 Gc \CX/ II 3 D Ex tc MIC T80°C Dc Description The ARTIDOR motion sensor is based on the latest high frequent radar technology and therefore capable of detecting even the slightest movements. Thanks to the wide opening angle and its 8 m detection range, any movement is detected. Even through doors, glass panes and thin walls, movements will be detected. The sensor electronics offers an electrical output that can deliver up to 2.000 VA on resistive or light inductive loads and an extra potential free contact. The intelligent, microprocessor-based sensor technology switches the light ON and OFF again after the preset time. Most convenient, safe and both energy and cost saving. The motion sensor can successfully be applied in porches, circulation areas, staircases, storerooms, cold storage rooms and business areas. The motion sensor meets the latest explosion safety requirements and can be applied in a wide range of locations such as at oil and gas production sites, in chemical and petrochemical industries, the pharmaceutical industry and the food industry. The ARTIDOR motion sensor is certified in accordance with European Directive 2014/34/EU (ATEX 114) for use in gas or dust hazardous areas and is CE marked. STANDARDS COMMITTEE MEMBER Artidor Explosion Safety B.V. - Emopad 38 -Phone:+31 (0)40 78 73 911

Explosion-safe Motion Sensor AR-021Based on radar detection technologyTechnical data Explosion safety: AR-021/003 M20 (2x) for cables from 9 - 13 mm in diameter This document is subject to change without notice.

Explosion-safe Twilight Switch AR-022Suitable for use in zone 2 and 22 Features • ATEX certified • Suitable for use in locations with gas and dust, zone 2 and 22 • Ingress protection level IP66 • Coated aluminum housing • Max. output power up to 2,000 VA • Light sensitivity 30 - 300 Lux • Delay ± 1 minute • Mounting bracket included The ARTIDOR twilight switch is based on a highly sensitive photodiode and modern electronics and offers an electrical output that can deliver up to 2.000 VA on pure resistive or light inductive loads and an additional potential free contact. The twilight switch...

Explosion-safe Twilight Switch AR-022Suitable for use in zone 2 and 22Technical data Explosion safety: AR-022/003 M20 (2x) for cables from 9 - 13 mm in diameter This document is subject to change without notice.

Explosion-safe Timer Relay AR-023 Suitable for zones 2 and 22 Features  ATEX certified  Suitable for use in gas and dust environments, zones 2 and 22  Protection rating IP65  Fiberglass-reinforced polyester  Two switched outputs to max. 4 Amps  Interconnection option to second device  Timer value maximum 10, 30 or 45 min (depending on model) II 3 G Ex nA mc IIC T6 Gc II 3 D Ex tc IIIC T80°C Dc Description The ARTIDOR explosion-safe AR-023 timer relay is a delayed shutoff relay with which two devices, for example lighting, is switched on after a press of the button and switched off...

Explosion-safe Timer Relay AR-023Suitable for zones 2 and 22Technical data European Directives: This document is subject to change without notice.

Explosion-safe Occupancy Sensor AR-024Based on passive infrared technology Features • ATEX-certified • Suitable for use in locations with gas and dust, zone 2 and 22 • Ingress protection level IP65 • Coated aluminum housing • Registration angle circular 360° • Range of coverage 24 x 44 m • Dimmer setting 10 - 2.000 Lux • Preset time 15 seconds - 30 minutes • Mounting height 2 - 10 m • Mounting bracket included, adjustable /c \ II 3 G Exec me IIC T6 Gc \CX/ || 3 D Ex me tc NIC T80°C Dc Directive 2014/34/EU (ATEX 114) for use in gas or dust hazardous Description The ARTIDOR explosion-safe...

Explosion-safe Occupancy Sensor AR-024Based on passive infrared technologyTechnical data Explosion safety: AR-024/003 M20 (2x) for cables from 9 - 13 mm in diameter This document is subject to change without notice.

Explosion-safe Door Magnet AR-030Universally applicable for floor or wall mounting Features • ATEX certified • Suitable for use in gas and dust environments, zones 2 and 22 • Protection rating IP65 • Impact-resistant plastic housing, nickel-plated magnet • 24 V DC and 24 V AC • Provided with 5 meters of factory sealed cable • Optional anchor plate • Surface mount on floor, ceiling or wall • Other versions available on request ir \ M 3 G Ex nA IIC T6 Gc \CX/ II 3 D Ex tc MIC T80°C Dc Description The ARTIDOR explosion-safe door magnet is a universally-applicable door magnet for floor or wall...

Explosion-safe Door Magnet AR-030Universally applicable for floor or wall mounting Technical specifications This document is subject to change without notice.

Explosion-safe SpotLED AR-040For industrial applications and transportation vehicles Features • ATEX certified: suitable for use in zone 2 (gas) and zone 22 (dust) hazardous areas • Ingress protection level IP67 • Coated aluminum housing • Available in two different housing colors • Stainless steel bracket, powder coated • Light source: 5 PowerLEDs, 3 Watts each • 780 Lumen • Various beam angles with different optics • Rotation angle from -50° to +105° /c~\ II 3 G Ex nA IIC T4 Gc NS-*/ II 3 D Extc NIC T135°C Dc Description ARTIDOR's explosion-safe SpotLED combines high-performance and...

Explosion-safe SpotLED AR-040For industrial applications and transportation vehiclesTechnical data Explosion safety: * Shown in the image on the front page This document can be subject to change without notice