AR-081 Bulkhead connector
3Pages

Explosion-safe Bulkhead Connector AR-081For gasses and liquids Features • ATEX certified • Method of protection against ignition Ex d • For the passage of gases and liquids • Minimal pressure losses • Holds hardly any moisture and dries quickly • Modern industrial design • Easy to clean • Stainless steel AISI 316 Description The ARTIDOR bulkhead connector was designed as a flame arrester for fitting in the wall of an explosion-safe flameproof Ex d housing. The bulkhead connector ensures the unobstructed passage of gases and liquids without affecting the explosion-safe nature of the housing. In the event of an explosion in the flameproof housing, the bulkhead connector prevents the flames and hot gases from being emitted; the hot gas is cooled by the bulkhead connector to such an extent that it is no longer capable of igniting the potentially explosive atmosphere. The bulkhead connection can be used as a coupling for pipes for gases and liquids such as coolants, refrigerants, hydraulic fluids and pneumatics. Thanks to its special design, the pressure loss in the bulkhead connector is very low and it holds no moisture. Therefore the bulkhead connector is extremely suitable for use in sampling pipes in gas analysis equipment. Flameproof housings are not usually designed to withstand an explosion arising at a pressure higher than 110% of the atmospheric pressure. A simple way to prevent pressure build up is the use of the bulkhead connector as a breather. STANDARDS COMMITTEE MEMBER Artidor Explosion Safety B.V. - Emopad 38 -Phone:+31 (0)40 78 73 911

Explosion safety: Pressure - Flow characteristics This document can be subject to change without notice

Explosion-safe Bulkhead Connector AR-081For gasses and liquidsOrdering code Type number This document can be subject to change without notice