Catalog excerpts
Explosion-safe Signal Light AR-077/211With connection terminals and cable gland Features ATEX certified Suitable for use in gas and dust hazardous areas, zones 1, 2, 21 and 22 Lens in 6 different colors Available with Xenon bulb or multi-LED reflex lamp Anodized aluminum housing with stainless steel wall mount bracket Impact-resistant polycarbonate dome Ingress Protection level IP66 24, 48, 60, 115 V AC/DC and 230 V AC Connection terminals 3 x 2.5 mm2 Description ARTIDOR's explosion-safe signal lights are designed to safely attract people's attention in areas with a possibly explosive atmosphere due to the release of gas or dust. They give a clearly detectable signal when a machine malfunctions or a process is interrupted, when there is a telephone call or a hazardous situation occurs which requires immediate attention. The signal light can be ordered as a: - strobe flashing light with a Xenon lamp; - steady-burn LED status light; - blinking LED status light. The transparent dome has light dispersion ribs on the inside for optimum visibility. There are six light colors available. The lighting fixture has a connection compartment equipped with three connection terminals (L, N, PE). It is also possible to order for six connection terminals, bridged 2 by 2, to connect more signal lights. The method of protection against ignition of the connection compartment is increased safety “Ex e”; no special skills are required for installation of the signal light. The ARTIDOR signal lights are explosion-safe and certified according to European directive 2014/34/EU (ATEX 114) and are CE marked. awt STANDARDS COMMITTEE MEMBER Artidor Explosion Safety B.V. - Emopad 38 - 5663 PB Geldrop - The Netherlands Phone: +31 (0)40 78 73 911 - www.artidor.com
Open the catalog to page 1Explosion-safe Signal Light AR-077/211With connection terminals and cable glandTechnical data Explosion safety: AC/DC AC/DC Signal Light (Xenon) 48 V 60 V AC/DC AC/DC AC/DC AC AC/DC AC Status Light (LED) blinking 24V 230V AC/DC AC This document can be subject to change without notice.
Open the catalog to page 2Explosion-safe Signal Light AR-077/211With connection terminals and cable glandOrdering code Type number * Supply voltage and lens color must be specified upon ordering. All signal lights are provided with a stainless steel wall bracket. This document can be subject to change without notice.
Open the catalog to page 3All Artidor Explosion Safety B.V. catalogs and technical brochures
-
AR-021 Motion sensor
2 Pages
-
AR-022 Twilight switch
2 Pages
-
AR-023 Timer Relay
2 Pages
-
AR-024 Occupancy sensor
2 Pages
-
AR-040 SpotLED
2 Pages
-
AR-047 LED Signal light
2 Pages
-
AR-048 LED Warning light
2 Pages
-
AR-081 Bulkhead connector
3 Pages
-
Artidor brochure 2018
37 Pages