AR-024 Occupancy sensor
2Pages

Explosion-safe Occupancy Sensor AR-024Based on passive infrared technology Features • ATEX-certified • Suitable for use in locations with gas and dust, zone 2 and 22 • Ingress protection level IP65 • Coated aluminum housing • Registration angle circular 360° • Range of coverage 24 x 44 m • Dimmer setting 10 - 2.000 Lux • Preset time 15 seconds - 30 minutes • Mounting height 2 - 10 m • Mounting bracket included, adjustable /c \ II 3 G Exec me IIC T6 Gc \CX/ || 3 D Ex me tc NIC T80°C Dc Directive 2014/34/EU (ATEX 114) for use in gas or dust hazardous Description The ARTIDOR explosion-safe occupancy detector AR-024 is based on passive infrared technology and capable of detecting movements of heat sources. Thanks to the wide opening angle and its 10 m range, this detector is suitable for monitoring large areas. The occupancy detector is designed for use inside large buildings for example warehouses and combines energy saving and the protection of the environment in addition to convenient lighting. Motion detectors switch the light depending on movements and the ambient light. Lighting will be switched off. The sensor itself does not emit any radiation and is therefore called “passive”. Unlike motion detectors, occupancy detectors can also switch off lighting if there is sufficient daylight, because of their advanced mixed light measurement (the principle on which occupancy detectors are based). Do not install detectors near heat sources like air-conditioning units, lights or radiators. The sensor electronics offers a potential free contact for switching up to 1,150 VA load. The occupancy detector is mounted on top a coated aluminum housing. The explosion safety to gas is arranged by the appliance of protection degree against ignition “Encapsulation”. The explosion safety to dust is arranged by the appliance of protection degree against ignition “protected by enclosure”. The ARTIDOR occupancy detector is certified in accordance with European areas and is CE marked. «>» STANDARDS COMMITTEE MEMBER Artidor Explosion Safety B.V. - Emopad 38 - 5663 PB Geldrop - The Netherlands Phone: +31 (0)40 78 73 911 - www.artido

Explosion-safe Occupancy Sensor AR-024Based on passive infrared technologyTechnical data Explosion safety: AR-024/003 M20 (2x) for cables from 9 - 13 mm in diameter This document is subject to change without notice.