□ Transmitters for connection to a Pt100, mV-transducer or resistance transmitter □ Start of measuring and measuring range to be adjusted at the □ Plastic case for mounting onto 35 mm standard mounting rail For connection to Pt100 - or mV measuring primary elements - or resis- tance potentiometer. Output signals are both a voltage signal 0...10 V and a current signal 0/4...20 mA. Both output signals are related to their common negative pole. measuring range: test sockets: voltage output: current output: supply voltage: power consumption: protection class: ambient temperature: temperature drift: physical dimensions temperature linear, voltage linear start of measuring and measuring range to be adjusted at the front via trimmer 2 mm 0 for measuring the output current, inter- nal resistance of the current meter max. 10 Q approx. 25 mA with overload or breeak of probe, 230 Vac/115 Vac via incorporated mains trans- Polyamid grey, for mounting on 35 mm standard operation green, overload or break of probe red input: thermoresistance element Pt100 in three-wire circuit range: -please specify-, output: 0...10 V and 0/4...20 mA, temperature linear input: voltage from 10 mV, range: -please specify- output: 0...10 V and 0/4...20 mA, supply voltage: 230/115 Vac, 24 Vac or 24 Vdc input: restistance potentiometer, range: -please specify- output: 0...10 V and 0/4...20 mA, supply voltage: 230/115 Vac, 24 Vac or 24 Vdc www.grillo-messgeraete.de • Email: [email protected] • Webshop: www.sensor-store.de