□ Isolation amplifier for implementation of standard signals with galvanic isolation between input-, output- and supply voltage □ Plastic case for mounting into 35 mm standard mounting rail Serves for physically isolation and synchronous amplification or trans- ducing of electrical standard signals. Incorporated supply voltage for supply of a two-wire measuring transmitter. Output signals are both a voltage 0...10 V and a current signal 0/4...20 mA. Both output signals are related to their common negative pole. supply voltage connection switching supply voltage: voltage output: current output: physically isolation: test sockets: voltage output: current output: supply voltage: power consumption: protection class: ambient temperature: temperature drift: between input-output-line voltag max. sepe- ration voltage 230 Vac, test voltage 2 mm diameter to measure the outputs- rent due to internal resistance of the current approx. 25 mA at control over or sensor greay nylon, for mounting on 35 mm stan- dard mounting rail according to EN50022 operation green, control over red with isolation between input-output-line voltage input: -please specify- supply voltage approx. 18 Vdc, non-stabilized Extra Charge www.grillo-messgeraete.de • Email: [email protected] • Webshop: www.sensor-store.de