Supply unit and supply converter ST225 - 1 Pages

Add to MyDirectIndustry favorites
Supply unit and supply converter ST225

Catalog excerpts

SUPPY UNIT and SUPPLY CONVERTER ST225 Converter to adapt various standard signals Supply voltage for two-wire transmitter Plastic housing for mounting on 35 mm standard mounting rail according to EN50022 For conversion of standard signals. Incorporated supply voltage for supply of a two-wire measuring transmitter. Output signals are both a voltage 0...10 V and a current signal 0/4...20 mA. Both output signals are related to their common negative pole. ACCURACY / ERROR LIMIT: Tolerance: ± 0,2 % Temperature drift: ± 0,2 % / 10 K Operating Mode: Entrance: Supply voltage: Settings: TECHNICAL SPECIFICATIONS: Measurement mode 0 / 0.2 ... 1V, 0/2 ... 10V, 0/4 ... 20mA Approx. 18 Vdc, unstabilized, max. 25 mA Measuring range adjustable via trimmer PHYSICAL: Display: Operating indicator green, overdrive or sensor break red Casing: Polyamide gray, for mounting on a 35 mm standard profile rail according to EN 50022 Dimensions: 22.5 x 99 x 110 mm (W x H x D) Protection class: IP 20 according to EN 60529 Connections: Screw terminals up to 2.5 mm² Ambient temperature: -10 to 50 ° C Rel. humidity: 0 ... 85%, no condensation Weight: Approx. 160 g ELECTRONIC: Power supply: 230 Vac / 115 Vac via input. Transformer or 24 Vac or 24 Vdc Power consumption: Approx. 1.5 VA Test sockets: 2 mm ø for measuring the output current, internal resistance of the current meter max. 10 Ω Voltage output: 0 ... 10 V, short circuit proof, max. 5 mA Current output: 0/4 ... 20 mA, max. Load 600 Ω Max. Output current: Approx. 25 mA for overdrive or sensor break, indicated by red LED CONFORMITY: EMC: EN 61000-6-2, EN 61000-6-3, CE-mark RoHS: according RoHS-directive 2011/65/EU Item no. Supply unit and supply converter ST225 Input: Customer-specific presetting required! Supply voltage: approx. 18 Vdc, non-stabilized Output: 0...10 V and 0/4...20 mA Supply voltage: 230/115 Vac, 24 Vac or 24 Vdc Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: info@grillo-messgeraete.de • web shop: www.se

 Open the catalog to page 1

All Arthur Grillo GmbH catalogs and technical brochures

  1. SPECIAL

    18 Pages

  2. TEMPERATURE

    20 Pages

  3. Display

    14 Pages

  4. HUMIDITY

    21 Pages

  5. PRESSURE

    35 Pages

  6. WR 200-F

    2 Pages

  7. SHT11/15

    1 Pages

  8. SGI

    1 Pages

  9. Venturirohr

    4 Pages

  10. MR 90

    4 Pages

Archived catalogs

  1. MID

    1 Pages

  2. MINI90

    1 Pages

  3. RGF

    1 Pages

  4. WBV

    1 Pages

  5. DS85-P

    2 Pages

  6. DS85

    1 Pages

  7. DPCS200

    2 Pages

  8. WR 90

    1 Pages

  9. AQD / AQ72

    1 Pages

  10. TOUCHSCREEN

    1 Pages

  11. AD-72P

    1 Pages

  12. AD96TF

    1 Pages

  13. AD 72P-ST

    1 Pages

  14. AD 72P-WT

    1 Pages

  15. AD 96TF

    1 Pages

  16. AFD

    1 Pages

  17. AFD-TK

    1 Pages

  18. CM2

    1 Pages

  19. O2T

    1 Pages

  20. ST225

    1 Pages

  21. SP225

    1 Pages

  22. TR225

    1 Pages

  23. GS225

    1 Pages

  24. GIV

    1 Pages

  25. Flora II

    1 Pages

  26. AF 1

    1 Pages

  27. catalogue

    80 Pages