For measure speed after the dynamic pressure method Arrangement of several cylinder pitot tube Central tubes with laterally attached probe tubes Material brass (up to 100 °C) or stainless steel (up to 450 °C) Pressure connection 6mm Mounting parts available The SGI is a special lattice arrangement of a plurality of cylinder probes, which are distributed over a cross section that can be at different flow distribution in a pipe found in a canal or a mean flow. The probe is connected to the grid and each pipe or channel dimensions can be customized. It can be made for the edge or square channel cross-sections. For larger sizes is usually required a thrust bearing. Specifications Construction: Pressure taps: Comment: The use of the differential Peritact 80 (± 1.5%) with the smallest range of 0...1 mbar results as a range for the lowest velocity 0...8 m / s. Grand calculation for cylinder position sensor and sensor grids: w = 200 x ∆р Cxρ The transmitter MKM (± 0.2%) and 2000-K10 Peritact (± 1%) with the smallest ranking of 0... 0.1 mbar as a result, the lowest range for velocity 0...3 m/s. Larger ranges are possible by adjusting the transmitter. central tubes with laterally attached probe tubes 6 mm ø plastic tubing for connection velocity in m/s differential pressure in mbar density at actual conditions in kg/m³ coefficient for cylindrical probe = 2 for Prandtl-pitot tube = 1 Measuring grid SGI Dimensions Other dimensions on request. ACCESSORIES Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: [email protected] • web shop: www.sensor-store.de