Catalogs > Arthur Grillo GmbH > product category - special

product category - special - 16 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

Arthur Grillo measuring & controlling systems Product catalog Precision at first Hand

No matter where or when you have to measure low pressure, temperature, flow or relative humidity among other measuring quantities - You will encounter Grillo measuring devices in any case. Many decades of experience and a clear commitment to first-grade workmanship make our measuring devices more precise, durable and thus extremely cost-effective. Above all in the field of low-pressure measuring the measuring devices made by Grillo keep the promises they make and thus live up to their good reputation. Innovative technology requirements are handled with individual feeling, ensuring that each...

Open the catalog to page 2

THE HISTORY OF ARTHUR GRILLO GMBH 2014 - After more than 10 years, the DA2000 is proving itself more and more at the market. Different designs with analogue output, switch contact, and weatherproof protective housing continuously expand the areas of application. 2012 - With the new differential pressure controller DPC200, fans can now be efficiently controlled via differential pressure or volume flow. Arthur Grillo is responding to the increasing demand for controllable ventilation systems with respect to the new ErP Directive 2015. 2009 - Additional modern low-pressure devices with own...

Open the catalog to page 3

We always strive for custom solutions for special applications. Please feel free to contact us with your measuring problem and we will make an effort to offer you a high-quality solution.We already realized custom solutions in the CO2/O2 measurement as well as refrigeration technology area. Areas of application: • Switch cabinet technologies Included in this product category are: • CO2-Measurement • Refrigeration technology • O2 Measurement • Transmitter DIN-rail • Supply- /signal Converter • Supply unit • Isolating amplifiers • Limit Switch

Open the catalog to page 4

Indoor air quality Dual Wavelength NDIR measurement methods Range 0...2000 ppm CO2 Ad in 6 stages over LED green-yellow-red Output 0/4...20 mA or 0...10 V Wall enclosure for mounting on flush-mounted switch box Power supply 24 Vac or 24 Vdc Better air quality reduces fatigue and loss of concentration! In many environments, the motivation decreases when the air quality deteriorates. The simplest solution is to open a window! However, this is not in any work environment possible. The CO2 monitor CM2 helps to keep the air quality at a constant level and to counteract fatigue. It measures the...

Open the catalog to page 5

Eisdicke erreicht Controlled ice production for cooling purposes Combination of sensor and evaluator Ice thickness selectable by 4 stages Changeover contact when reaching the preselected ice thickness The ice thickness controller – EDR2 improves the automatically production of ice. Vorwahl Eisdicke Normally, ice is produced, in a filled basins in which cooling plates are positioned. On those plates ice layers grows continuously till the freezing process is switched off. A continuous constant ice thickness cannot be achieved via the conventional method. The EDR2 was developed in order to...

Open the catalog to page 6

O2T - flue gas tester for O2 Oxygen measurement directly in the flue gas Outputssignale for O2-content and flue gas temperature The flue gas analyser O2T is a transducer for measuring the oxygen content and temperature of the flue gas. The transmitter operates with a zirconia probe for O2 determination and with a measuring resistor Pt100 for temperature measurement. It is installed directly into the flue gas duct. A gas treatment is not required. Specifications Measured armature: Case: Weight: Supply voltage: Power consumption: EMC: stainless steel pipe, D=60mm, lenght 250mm stainless steel...

Open the catalog to page 7

TRANSMITTER WT225 - VT225 - WF225 Transmitter for connection to a Pt100 element , mV transmitter or potentiometer Measurement and span from the front by trimmer Outputs 0...10 V and 0/4...20 mA Operating temperature 0...50 ° C Supply voltage 230/115 Vac, 24 Vac or 24 Vdc Plastic housing for mounting on 35 mm DIN rail according to EN 50022 (DIN-rail) For connection to Pt100 - or mV measuring primary elements - or resistance potentiometer. Output signals are both a voltage signal 0...10 V and a current signal 0/4...20 mA. Both output signals are related to their common negative pole....

Open the catalog to page 8

SUPPY UNIT and SUPPLY CONVERTER ST225 Converter to adapt various standard signals Supply voltage for two-wire transmitter Plastic housing for mounting on 35 mm standard mounting rail according to EN50022 For conversion of standard signals. Incorporated supply voltage for supply of a two-wire measuring transmitter. Output signals are both a voltage 0...10 V and a current signal 0/4...20 mA. Both output signals are related to their common negative pole. Specifications Input: Supply voltage: Characteristic: Settings: Test sockets: 0/0,2...1V, 0/2...10 V, 0/4...20 mA approx. 18 Vdc,...

Open the catalog to page 9

Arthur Gr«llo □ Multiple power supply electronically up to four two-wire transmitters □ Isolation of each circuit with each other protected against short □ Supply voltage 18...23 Vdc unregulated, □ Power supply voltage 230 Vac/115 Vac □ Plastic housing for mounting on a 35 mm DIN-rail according to EN Serves for feeding of two-wire transmitter with direct voltage by output signal of 4...20 mA. The single circuits are physically seperated to each other and are elec- tronic fused to short circuit. Supply voltage: Pulsation factor: Signal circuit: Test sockets: Supply voltage: Power...

Open the catalog to page 10

Isolating amplifier for implementation on standard signals Galvanic isolation between input, output and power supply Input-signals 0...1V, 0...10V , 0/4...20 mA 0...10V output voltage, short circuit proof, max. 5 mA 0/4...20 mA current output About 18 Vdc unregulated supply voltage, max. 25 mA Supply voltage 230 Vac/115 Vac Plastic housing for mounting on a 35 mm standard mounting DIN-rail according to EN 50022 Serves for physically isolation and synchronous amplification or transducing of electrical standard signals. Incorporated supply voltage for supply of a two-wire measuring...

Open the catalog to page 11

product category - special - 16 Pages

Catalog excerpts

All Arthur Grillo GmbH catalogs and technical brochures

Archived catalogs