DIFFERENTIAL PRESSURE GAUGE PERITACT 80 Diaphragm element Smallest measuring range 0...50 Pa Analogue output 0...10 V or 4...20 mA Large analogue scale Min. and max. contact possible Also two-wire transmitter MZP80 available Protection class IP 65 Manometer with diaphragm element for indication of pressure, under pressure or differential pressure of non aggressive gas. For flow measurements, by the differential pressure method, versions are available with a square graduation. Specifications Smallest measurement range: 50 Pa Largest measurement range: 10.000 Pa Overload protection: Static pressure: Pressure Connections: max. 0,2 bar hose liners 8 mm ø screw terminals Electrical Connections: Supply voltage: 230 Vac, 24 Vac or 24 Vdc, 2-wire technology 13...30 Vdc with supply voltage 0/4...20 mA or 0...10 V or 4...20 mA in 2-wire technology 2 Set pointer, adjustable over the full scale range, depending Limit value 1 output relay with potential-free changeover contact Contact rating: Wall-mounted housing: ABS, protection class IP 65, dimensions 134 x 170 x 137 mm (WxHxD) Ambient temperature: Weight: tested according EN 61000-6-2, EN 61000-6-3, CE mark Limit value:

DIFFERENTIAL PRESSURE GAUGE PERITACT 80 Dimensions (mm) 5,8 Differential pressure gauge PERITACT 80 Wall mount device Measurement range: Customer-specific presetting required! Differential pressure gauge PERITACT 80 with min. and max. contacts Supply voltage 230 Vac, 24 Vac, wall mount device Measurement range: Customer-specific presetting required! Differential pressure Ausgang Netz gauge PERITACT 80 with electrical output signal 0/4...20 mA or 0...10 V, supply voltage 230 Vac or 24 Vac, wall mount device Measurement range & signal output: Customer-specific presetting required! Differential...