LOW PRESSURE TRANSMITTER PERITACT 2000-K10 Dynamic micro flow sensor Smallest measuring range 0...10 Pa Analogue output 0...10 V and 0/4...20 mA 2 outputs with change-over contacts 250V, 8A Characteristic linear or square-rooted LCD-Display with 4 lines of 20 characters Contact function min. or max. Supply voltage 230 Vac, 24 Vac or 24 Vdc Protection class IP 65 Manometer with diaphragm element for indication of pressure, under pressure or differential pressure of non aggressive gas. Thanks to the measuring principle, the device is irrespective of position and has an extremely high zero-point security with the smallest measuring ranges. Thereby, it is particularly suitable for air flow measurement according to the “Differential pressure” or “dynamic pressure” method with square-root characteristic. No negative pressure measurement possible. Specifications Smallest measurement range: 10 Pa, resolution 0,1 Pa Largest measurement range: 3500 Pa, resolution 11 Pa Selected measuring range: preset parameters as desired Overload protection: Static pressure: Pressure Connections: Electrical Connections: Cable entry: Supply voltage: Power consumption: Analogue output: Characteristic line: Electrical absorption: Switching output: Switching function: Contact load: Switching delay: Display: Connection diagram 1. line: 2. line: 3. line: 4. line: Wall mountable housing: Protection class: Ambient temperature: Weight: EMC: Tolerance: max. 1 bar max. 0,2 bar hose liners 8 mm ø screw terminals 3 x M16 x 1,5 230 Vac, 24 Vac or 24 Vdc approx. 1,5 VA 0/2...10 V and 0/4...20 mA linear or square rooted adjustable 0, 1, 2, 4, 8, 16, 32 s 2 potential free switching contacts min. or max. for each contact 250 Vac, 8 A non-inductive load adjustable 0...20 s lighted LCD-Display 4 line, 20 digit, display in Pa or m³/h following values are displayed: pressure - actual value with unit pressure - actual value as analogue bar adjusted limit value (arrows) adjusted limit value (digital) Ultra mid/ABS, black/grey dimensions 122 x 120 x 85 mm (WxHxD) IP 65 -10...50 °C approx. 900 g tested according EN 61000-6-2, EN 61000-6-3, CE mark ±1% Item no. Low pressure transmitter PERITACT 2000-K10 Measurement range & signal output: Customer-specific presetting required! Output: 0/2...10 V and 0/4...20 mA, 2 changeover contacts 250 Vac, 8 A non-inductive Supply voltage: 230 Vac and 24 Vdc ACCESSORIES Mounting set with screws, plastic-pressure taps, 2 m plastic hose (7 x 1,5 mm) Assembly frame for panel mounting incl. all mounting hardware Test certificate Special measuring range e.g. 0...6000 Pa (no negative pressure measurement possible) Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: [email protected]