LOW PRESSURE TRANSMITTER PERITACT 2000-K Diaphragm element Smallest measuring range 0...50 Pa Backlit LCD display with 4 lines of 20 characters Analogue output 0...10 V and 4...20 mA 2 switching output signals potential free Switching function min. or max. Supply voltage 230 Vac, 24 Vac or 24 Vdc Protection class IP 65 Manometer with diaphragm element for indication of pressure, under pressure or differential pressure of non aggressive gas. Also for air flow measurement according to the Differential Pressure or dynamic pressure method with square-root characteristic. Connection diagram Item no. Low pressure transmitter Peritact 2000-K Measurement range & signal output: Customer-specific presetting required! Output: 0/2...10 V and 0/4...20 mA, 2 changeover contacts 250 Vac, 8 A non-inductive Supply voltage: 230 Vac, 24 Vac or 24 Vdc Specifications Smallest measurement range: 50 Pa Largest measurement range: 10.000 Pa as desired, ± range Selected measuring range: e.g. -50...0...+50 Pa extra charge (as far as technical possible) 0,2 bar Overload protection: max. 0,2 bar Static pressure: hose liners 8 mm ø Pressure Connections: screw terminals Electrical Connections: 3 x M16 x 1,5 Cable entry: 230 Vac, 24 Vac or 24 Vdc Supply voltage: approx. 1,5 VA Power consumption: 0/2...10 V and 0/4...20 mA Analogue output: pressure - linear Characteristic line: volume - to square root linear or to square rooted adjustable 0, 1, 2, 4, 8, 16, 32 s Electrical absorption: 2 potential free switching contacts Switching output: min. or max. for each contact Switching function: 250 Vac, 8 A non-inductive load Contact load: adjustable 0...20 s Switching delay: lighted LCD-Display Display: 4 line, 20 digit following values are displayed: pressure - actual value with unit 1. line: pressure - actual value as analogue bar 2. line: adjusted limit value (arrows) 3. line: adjusted limit value (digital) 4. line: Ultra mid/ABS, black/grey Wall mountable housing: dimensions 122 x 120 x 85 mm (WxHxD) IP 65 Protection class: -10...50 °C Ambient temperature: approx. 900 g Weight: tested according EN 61000-6-2, EN 61000-6-3, EMC: CE mark ±1% Tolerance: Assembly frame for panel mounting incl. all mounting hardware Test certificate Special measuring range e.g. -20...0...+80 Pa Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: [email protected] • web shop: www.sensor-store.de Mounting set with screws, plastic-pressure taps,