□ Oxygen measurement directly in the flue gas □ Outputssignale for 02-content and flue gas temperature The flue gas analyser 02T is a transducer for measuring the oxygen content The transmitter operates with a zirconia probe for 02 determination and with a measuring resistor Pt100 for temperature measurement. It is installed directly into the flue gas duct. A gas treatment is not required. measured armature: physical dimensions supply voltage: power consumption: response time: permissible fuels: lifetime probe: accuracy transmitter: stainless steel pipe, D=60mm, lenght 250mm stainless steel tube, diameter 60 mm, 250 mm long with flow pipe 180 mm long, aluminum housing, transformer and transmitter. Case bolted directly to the measuring valve, thermally insulated, protection class IP 65, 3 cable glands PG11 foreign heated zirkondioxid-probe < 15 s fur 90 % measuring value change approx. 2 min. to turn on from the supply voltage residue-free gas and light fuel oil test gas connection electroniccase for continuous 02-measurement and temperature measurement weld-nozzle 60 0 x 4 mm of mild steel weld-nozzle stainless steel on request Reserve measuring probe www.grillo-messgeraete.de • Email: [email protected] • Webshop: www.sensor-store.de