O2T - flue gas tester for O2
1Pages

{{requestButtons}}

Catalog excerpts

O2T - flue gas tester for O2 - 1

Arthiir Grillo measuring & controlling systems Measurement accuracy - O2 measurement: Measuring accuracy - Temperature: Measuring accuracy of the transmitter: Operating Mode: □ Oxygen measurement directly in the flue gas □ Outputssignale for O2-content and flue gas temperature The flue gas analyser O2T is a transducer for measuring the oxygen content and temperature of the flue gas. The transmitter operates with a zirconia probe for O2 determination and with a measuring resistor Pt100 for temperature measurement. It is installed directly into the flue gas duct. A gas treatment is not required. ACCURACY/ERROR LIMIT: ± 5% of reading ± 2.2 °C for 100 °C <t <400 °C ± 0.5% of final value TECHNICAL SPECIFICATIONS: Measurement mode Measuring probe O2 measurement O2 measurement: Measuring ranges: Exit: Burden: Response time: Operational readiness: Exhaust temperature: Permissible fuels: Tool life: Testing option: Foreign-heated zirconium dioxide probe 0 ... 5% O2 0..10% O2 0 ... 20% O2 0 ... 20 mA or 4 ... 20 mA Max. 500 Q <15 s for 90% measured value change Approx. 2 min. After switching on the supply voltage Max. 400 ° C, continuous Residue-free gases and light fuel oil > 1 year Test gas connection on electronics housing Temperature measurement 80—^Measuring element - Temperature: Measuring ranges: Exit: Burden: Measuring instrument: Casing: Protection class Cable gland Dimensions Weight Pt100 according to DIN EN 60751 0 ... 250 °C or 0 ... 400 °C 0 ... 20 mA or 4 ... 20 mA Max. 500 Q PHYSICAL: Stainless steel pipe, 0 60 mm, 250 mm long with flow pipe 180 mm long Aluminum die-cast for receiving the heating transformer as well as the evaluation electronics. Housing screwed directly to the measuring armature, thermally insulated IP 65 according to EN 60529 PG11 120 x 122 x 80 Approx. 6 kg Power supply: Power consumption: CONFORMITY: EN 61000-6-2, EN 61000-6-3, CE-mark according RoHS-directive 2011/65/EU Flue gas analyser O2T For continuous O2-measurement and temperature measurement Weld-nozzle 60 0 x 4 mm of mild steel; weld-nozzle stainless steel on request Measurement range & signal output: Customer-specific presetting required! Reserve measuring probe Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: info@grillo-messgeraete.de • web shop: www.sensor-store.de

Open the catalog to page 1

All Arthur Grillo GmbH catalogs and technical brochures

  1. SPECIAL

    18 Pages

  2. TEMPERATURE

    20 Pages

  3. Display

    14 Pages

  4. HUMIDITY

    21 Pages

  5. PRESSURE

    35 Pages

  6. WR 200-F

    2 Pages

  7. SHT11/15

    1 Pages

  8. SGI

    1 Pages

  9. Venturirohr

    4 Pages

  10. MR 90

    4 Pages

Archived catalogs

  1. MID

    1 Pages

  2. MINI90

    1 Pages

  3. RGF

    1 Pages

  4. WBV

    1 Pages

  5. DS85-P

    2 Pages

  6. DS85

    1 Pages

  7. DPCS200

    2 Pages

  8. WR 90

    1 Pages

  9. AQD / AQ72

    1 Pages

  10. TOUCHSCREEN

    1 Pages

  11. AD-72P

    1 Pages

  12. AD96TF

    1 Pages

  13. AD 72P-ST

    1 Pages

  14. AD 72P-WT

    1 Pages

  15. AD 96TF

    1 Pages

  16. AFD

    1 Pages

  17. AFD-TK

    1 Pages

  18. CM2

    1 Pages

  19. O2T

    1 Pages

  20. ST225

    1 Pages

  21. SP225

    1 Pages

  22. TR225

    1 Pages

  23. GS225

    1 Pages

  24. GIV

    1 Pages

  25. Flora II

    1 Pages

  26. AF 1

    1 Pages

  27. catalogue

    80 Pages