MULTI RANGE TRANSMITTER MINI90-P Resistant element Pt100 class A DIN EN 60751 8 calibrated measuring ranges selectable via DIP-switches Sensor tube 9 mm stainless steel 1.4571 Analogue output 4...20 mA Plastic housing with protection class IP 65 The MINI90-P series is designed for temperature measurement in pipes or channels. Three versions are available: • • • In the G1 / 2A version of the measuring insert, together with electronics can be replaced without that the sensor tube must be screwed out of the pipeline. The sensor tube is made of stainless steel 1.4571, the head of plastic ABS. Electronics running in microcontroller technology with 8 calibrated measuring ranges that can be selected via DIP switches. Straight sensor tube for use in protective sleeves Perforated sensor tube tip for measurements in air ducts Sensor tube with G1 / 2A screw for measurements in liquids Specifications Smallest span: Max. temperature on sensor: Measurement sensors: Output: Supply voltage: Ambient temperature For the electronic: Case: Sensor tube: Range: Weight: Accuracy: EMC: 25 °C 400 °C Pt100 according to DIN EN 60751 4...20 mA, linear to temperature 13...30 V, any polarity -10...0...+70 °C plastic ABS, light grey protection class IP 65 to EN 60529 stainless steel, material-no. 1.4571 check table approx. 250 g < 0,25 % ± 0,3 °C tested according EN 61000-6-2, EN 61000-6-3, CE mark Measurement range: Polarität beliebig polarity arbitrary Multiple range transmitter MINI 90-P sensor tube smooth, 8 selectable range Measurement range: Customer-specific presetting required! Multiple range transmitter MINI 90-P sensor tube perforated, 8 selectable range Measurement range: Customer-specific presetting required! Multiple range transmitter MINI 90-P sensor tube with G1/2A, 8 selectable range Measurement range: Customer-specific presetting required! Mounting flange MF-M90 for air ducts Screw-in sleeve SHS-M90, brass, brazed 71203 Customer-specific presetting required!