Magnetic inductive transducers Large measurement ratio Low pressure drop Lining Teflon PTFE, max. Temperature 130 ° C Output 4... 20 mA, flow linear Accuracy 0.6% of reading Flanged to DIN 2501 Power supply 230 Vac Advantage: linear outputs-signal, high meassuring ratio, low pressure-loss Conditions for use: Minimum fluid conductivity: 5 mS/cm. This is given to water and glycol-water mixtures normally. Temperature max. 130 °C, preferably mounting the transmitter in the return line Item no. Magnetic-inductiver flowmeter MID Teflon-lined PTFE, max. temperature 130 °C Connection: flanges according to DIN 2501 p.37.2 PN40/PN16/PN10 Supply voltage: 230 Vac Output: 4...20 mA, linear flow, accuracy ± 0.6% of rate Nominal diameter DN50 PN40 span 0...70,7 m³/h, factory-adjusted 0...20 m³/h Nominal diameter DN65 PN16 Span 0...119,5 m³/h, factory-adjusted 0...50 m³/h Nominal diameter DN80 PN16 Span 0...181 m³/h, factory-adjusted 0...50 m³/h Nominal diameter DN100 PN16 span 0...282,7 m³/h, factory-adjusted 0...70 m³/h Nominal diameter DN125 PN16 Span 0...441,8 m³/h, factory-adjusted 0...100 m³/h Nominal diameter DN40 PN40 Span 0...45,2 m³/h, factory-adjusted 0...10 m³/h Nominal diameter DN32 PN40 Span 0...29 m³/h, factory-adjusted 0...10 m³/h Nominal diameter DN150 PN16 Span 0...636,2 m³/h, factory-adjusted 0...150 m³/h Nominal diameter DN200 PN10 Span 0...1131 m³/h, factory-adjusted 0...250 m³/h