Resistance element Pt100 class A DIN EN 60751 Sensor tube plain or perforated (ventilation applications) Tube 9 mm stainless steel (1.4571) Connection head plastic ABS Special length available Sliding mounting flange Different protection sleeves available Resistance thermometer for temperature measurement up to max. 160 °C. As a measuring element, a measuring resistor Pt100 class A is used in accordance with DIN EN 60751. Specifications Protection tube: Connection head: Resistance: Temperature: X10CrNiMoTi 1810, 9 mm ø, material-no. 1.4571 plastic Pt100 class A according DIN EN 60751 max. 160 °C Item no. Duct temperature sensor KF1 sensor tube smooth, 250 mm length Duct temperature sensor KF1 probe tip perforated pipe, 250 mm length ACCESSORIES Mounting flange MF-KF1 Screw protection sleeve brass ESH-M Screw protection sleeve stainless steel ESH-VA Item no. Screw-in temperature sensor ETF with G1/2A-screw, material 1.4571, V4A 6750 Room-temperature sensor RF1 For dry areas, wall construction, white plastic case, for mounting on 55 mm switch box, use the range 0 .. 50 °C Outdoor-temperature sensor AF1 IP 65, with sun protection and mounting clips for wall construction, range: -30 ... 0 .. +60 ° C Contact-temperature sensor ATF1 Range up to 100 ° C, 4-wire circuit with 3 m cable and pipe clamp for pipes from 10 to 150 mm Contact-temperature sensor ATF2 Range up to 200 °C, 4-wire-circuit with 3 m cable and pipe clamp for pipes from 10 up to 150 mm SUCHARGE Special fittings with temperature sensor Pt1000 Special fittings with two Pt100 elements, if technically possible