DIFFERENTIAL PRESSURE SENSOR with selectable measurment range DS200 Diaphragm element Measuring range from 0...50 Pa to 0...6000 Pa 4 calibrated measuring ranges selectable via DIP-switch Alphanumeric LCD display Indication of differential pressure and flow in Pa / m³/h Analogue output signal 0/2...10 V or 0/4...20 mA Supply voltage 15...30 Vdc or 24 Vac Compact plastic housing IP 54; UL 94 HB The differential pressure sensor DS200 is used to measure small differential pressures in ventilation and air conditioning. As transducer a soft silicone membrane is used, which moves under the influence of a differential pressure measuring spring. The DS200 has four calibrated measuring ranges, which can be selected via a DIP switch. A two-line alphanumeric LCD display shows the measured pressure in the physical unit. In combination with a differential pressure transducer (orifice plate, venturi or pitot tube), the DS200 also directly display the flow in a pipeline. For this purpose, the differential pressure of the differential pressure transducer is square root and multiplied by an adjustable factor of the differential pressure transducer. A damping of output signal and display, because of fluctuating measured values, can be adjusted in three stages via DIP switches. The differential pressure sensor DS200 delivers an analogue output signal of 0/2 ... 10 V or 0/4 ... 20 mA. The supply voltage is 15 ... 30 Vdc or 24 Vac. Specifications: Transmitter: air or non-aggressive gas; silicone membrane with transmitter and differential transformer Static pressure: Pressure Connections: Housing: Electrical Connections: ultra mid with hinged lid made of ABS; UL94HB cable entry M16x1,5, protected screw terminals, electronic protected for false polarity Supply voltage: Power consumption: Output: 15...30 Vdc or 24 Vac ± 15 % approx. 12 mA (bei 24 Vdc) 0/2...10 V 3-wire technology switchable via jumper to 0/4...20 mA linear for pressure measurement or square root when flow measurement double spaced alphanumeric LCD display, 2 x 16 digit Absorb ability: Ambient temperature: Operating position: Overload protection: Lowest range: Widest range: vertical, position sensitivity when turned by 90° about 25 Pa tested according EN 61000-6-2, EN 61000-6-3, CE mark

DIFFERENTIAL PRESSURE SENSOR with selectable measurment range DS200 Unit type Error limits (related to the actual range) Zero deviation Final value deviation Output: 0/2...10 V, 0/4...20 mA, 3-wire technology Supply voltage: 15...30 Vdc, 24 Vac Measurement range: 0...200, 0...150, 0...100 and 0...50 Pa Differential pressure sensor DS200-10 Output: 0/2...10 V, 0/4...20 mA, 3-wire technology Supply voltage: 15...30 Vdc, 24 Vac Measurement range: 0...1000, 0...500, 0...300 and 0...200 Pa Differential pressure sensor DS200-60 Differential pressure sensor DS200-2 ACCESSORIES Mounting set M-DS with...