Arthur Grillo i(rolling systems DIFFERENTIAL PRESSURE / VOLUME FLOW CONTROLLER DPC200-R Electromechanical diaphragm measuring system Measuring range from 0...50 Pa (0,5 mbar) up to 0...6000 Pa (60 mbar) Alphanumeric LCD-display Relay alarm output for measuring and control mode Selectable measurements (differential pressure or volume flow) Selectable units (metric or imperial) Adjustable k-factor for volume flow calculation Controlling mode or measuring mode selectable Measuring mode with adjustable limit value Control mode with adjustable: - maximum output voltage - Control action: positive / heat or negative / cool Compact plastic housing IP 54 The DPCs are electromechanical differential pressure / volume flow controllers with a diaphragm measuring system and a compre- hensive evaluation software. They are used to measure and control the smallest differential pressures of non-aggressive gases, in Their optimal application area can be found in the field of climatic technology for controlling fans, room pressure monitoring or filter control. The devices allow controlling of air flow or keeping up a constant pressure in a closed environment. In addition to the analog output, an additional alarm output (open collector, max. 30 V / 30 mA or relay 250 Vac /10 A) for limit monitoring or filter monitoring. The device provides a radiated output signal as a volumetric flow sensor. In the pressure or volume flow control, the output signal is the manipulated variable of the PI control. Connection diagram Alarm Ausgang www.grillo-messgeraete.de/en • Email: [email protected] • web shop: www.sensor-store.de

DIFFERENTIAL PRESSURE / VOLUME FLOW CONTROLLER DPC200-R Overpressure protection: Static pressure: Zero point calibration: Reaktionszeit: Zero drift: Sum of linearity and hysteresis: Temperature drift zero point: Temperature drift measuring range: Operating mode: Measuring medium: Measuring principle: Measuring unit: Smallest measuring range: Largest measuring range: Measuring range: Measuring range selection: Adjustable controlling parameters: Characteristic: Ambient temperature: Storage temperature: Control characteristic: Setpoint settings: Limit signal Output / alarm output: Zeitverzögerung...