Catalogs >
Arthur Grillo GmbH >
data sheet MINI90

data sheet MINI90
1Pages

Catalog excerpts

Arthur Grillo TRANSMITTER MINI90 □ Temperature transmitter with Pt100 according DIN EN 60751 □ Analogue outputs 0...10 V or 4...20 mA □ Plastic case with protection class IP 65 □ Sensor tube from 9 mm stainless steel 1.4571 The MINI90 series is used for temperature measurement in pipes or ducts. Three versions are available: smooth probe tube for use in protective sleeves, perforated pipe probe tip for measurement in air ducts and pipes with G1/2A-screwing sensor for measurements in liquids. In the G1/2A-version the measuring insert can be replaced with the electronic, without demounting the tube. The sensor tube is made of stainless steel 1.4571, the head of ABS plastic. Operating mode: Measuring medium: Measuring principle: Measuring unit: Measuring range: Protective tube: Connection head: Sleeve: Protection class: Electrical connection: Installation: Weight: Output: Supply voltage: EMC: RoHS: TECHNICAL SPECIFICATIONS: Measuring mode Temperature Pt100 class A according DIN EN 60751 °C 0...400 °C PHYSICALLY: 9 mm stainless steel, w. 1.4571 Plastic ABS, light gray Screw-in protective sleeve SHS-M90, brass, brazed; Welding protection sleeve SHE-M90, St37 PN40 IP 65 according to EN 60529 Two-wire, three-wire technology Mounting flange Approx. 250 g ELECTRONIC: 13 ... 30 Vdc, any polarity or 24 Vdc or 24 Vac, ± 25% 0...10 V or 4...20 mA CONFORMITY: EN 61000-6-2, EN 61000-6-3, CE-mark according RoHS-directive 2011/65/EU Time constants at different conditions: time constant threaded protection sleeve SHS-M90 weld-in protection sleeve SHE-M 90 Medium: Water sec. with protection sleeve, brass oil-filled 50 Duct temperature transmitter MINI90 plan tube 2-wire technology, output: 4...20 mA Measurement range: Customer-specific presetting required! 7120 3-wire technology, output: 0...10 V Measurement range: Customer-specific presetting required! 7125 Duct temperature transmitter MINI90 tube end perforated 2-wire technology, output: 4...20 mA Measurement range: Customer-specific presetting required! 7121 3-wire technology, output: 0...10 V Measurement range: Customer-specific presetting required! 7126 Duct temperature transmitter MINI90 welded screwing G1/2A, mounting length 100 mm 2-wire technology, output: 4...20 mA Measurement range: Customer-specific presetting required! 7122 3-wire technology, output: 0...10 V Measurement range: Customer-specific presetting required! 7127 Mounting flange MF-M 90 for air ducts 71201 Threaded protection sleeve SHS-M 90, brass, brass, brazed 71202 Weld-in protection sleeve SHE-M 90 St37 PN40 71203 Special length L1 / L2 Customer-specific presetting required! 71204 Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: info@grillo-messgeraete.de • web shop: www.sensor-store.de

Open the catalog to page 1